Anyone using CATIA V5 ?

Discussion in 'Software' started by Guest, Sep 11, 2002.

  1. oceanmaster66
    Joined: Jan 2004
    Posts: 17
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: New York

    oceanmaster66 Junior Member

    I too would like to know if Catia V5 R19 has Catia for Yacht in it and has to be activated or if it is a separate add-in module. None of the brochures fron Dassault is very clear on the subject.
     
  2. marshmat
    Joined: Apr 2005
    Posts: 4,127
    Likes: 149, Points: 63, Legacy Rep: 2043
    Location: Ontario

    marshmat Senior Member

    Looking at the marketing materials and target market for CATIA Yacht, I would hazard a guess that they might be pricing this version somewhat more aggressively. I am sure the distributors are eager to talk to potential clients...

    Still, CATIA is up in the same market as NX and Pro/E, even if all three of those are being pushed at the midrange market these days. Licences in this bracket often start at ten grand or so per seat, averaging more like seventeen. Some packages or modules in this bracket have annual maintenance fees that can run a couple thousand bucks a year. CATIA may run on a lower-end computer better than some competitors, and I've seen it run this way. But most of the time, a $17,000 licence is accompanied by five to ten thousand dollars in hardware, upgraded storage and backup capacity to handle the resulting models.... a firm buying multiple seats will probably have some server and network upgrading to facilitate all the collaboration features.... we're now into the mid twenties. Now you have to take courses, or pay your engineers to take courses, to make use of all this power. It's not hard to see how one could top $40k per seat, getting established in CATIA, NX or Pro/E with a good set of modules specific to your industry.

    Now, depending on how busy you are and how quickly your clients need things done, it may be possible to earn that back in short order. A busy design house moving from 2D CAD to a fully-integrated system might even realize savings in the same fiscal year. But moving into upper-tier CAD systems is not a step to be taken lightly; you need to know you can earn back the initial cost.
     
  3. DavidJ
    Joined: Jun 2004
    Posts: 222
    Likes: 33, Points: 0, Legacy Rep: 441
    Location: Canada

    DavidJ Senior Member

    Absolutely. Moving to any large design package should be done with lots of research. I also believe the biggest advantages of switching to Catia won't be noticed by firms presently working mostly in 2D cad. Or firms doing lots of preliminary designs or companies that stop at "design drawings".

    The biggest advantages will be seen by firms already working in 3D. And these will be even greater still if the company is producing detail design drawings and CNC cutfiles. The farther you go with the design the more advantageous Catia would be.

    If greater than 80% of your work is already being done in simpler 3D programs such as Rhino or solidworks then it might be time to look at Catia (or shipconstructor or proE or whatever best suits your scope of work). This also means things like computer hardware and servers shouldn't need to be upgraded. Solidworks has some of the highest requirements for video cards and other hardware. If you are presently trying to design an entire boat in solidworks, it is time to look at Catia.
     
    1 person likes this.
  4. yachty4000
    Joined: Apr 2004
    Posts: 36
    Likes: 1, Points: 0, Legacy Rep: 36
    Location: uk

    yachty4000 Junior Member

    Catia is used by parts of the indstry even by mainstream yacht designers. It is however a huge outlay it beauty is the bolt on options such as FAE, CFD and ability to be used to model complete CAM production process. It far more powerful than the average company needs hence why it is used by Airbus and Bosch. The only high profile advertised user is Oyster who you find on some marketing leaflets and therefore Rob Humphries designer but it used by a lot more for example cup teams use it because of it FEA features without remodelling. I know some of the big french mass producers use it. I never use it for initial hull modelling preferring specific Naval Architecture software but it part and assembley tools for interiors are excellent.
     
    Last edited: May 23, 2009
  5. dimitarp
    Joined: Feb 2006
    Posts: 93
    Likes: 4, Points: 8, Legacy Rep: 19
    Location: Bulgaria

    dimitarp Junior Member

  6. yachty4000
    Joined: Apr 2004
    Posts: 36
    Likes: 1, Points: 0, Legacy Rep: 36
    Location: uk

    yachty4000 Junior Member

  7. zeroname
    Joined: Oct 2008
    Posts: 276
    Likes: 5, Points: 0, Legacy Rep: 90
    Location: Europe

    zeroname Naval Architect

    advertising ?
     
  8. yachty4000
    Joined: Apr 2004
    Posts: 36
    Likes: 1, Points: 0, Legacy Rep: 36
    Location: uk

    yachty4000 Junior Member

    An advert I dont think so I am not connected to catia but thought those who havent used the software may be interested. Here the official site so I can't be accused of advertising on :) http://www.3ds.com/products/catia/mid-market/catia-for-yacht/#vid1

    There now a Naval Architecture tool similar to the way ORCA plugs into Rhino for Catia but I haven't used it.
     
  9. LarryMcI
    Joined: Mar 2010
    Posts: 25
    Likes: 0, Points: 1, Legacy Rep: 10
    Location: Florida

    LarryMcI Junior Member

  10. PhotoBoatGuy
    Joined: Feb 2004
    Posts: 24
    Likes: 1, Points: 0, Legacy Rep: 17
    Location: Redmond, WA

    PhotoBoatGuy Rhino fanatic

    It seems to me a question of how much you want your model to do. For instance, I am a Rhino fanatic. There is NO hull feature that I can't model in Rhino. That's not idle boasting. I've been using it since v1.

    With plug-ins you can achieve most of the functionality you talk about that pertains to a designer. You can even calculate hydrostatics and GZ curves in Rhino, using intrinsic Rhino commands, in less than an hour.

    You can also model piping, interiors, sails, etc. And it has a full set of tools to allow you to do your 2D drafting in the same file as the 3D model, or in separate files.

    However, in a Shipyard environment, you have a different story. There, you need to keep track of a myriad of parts, components, modules, etc. that would boggle the mind of even the most hardcore practitioner in lesser programs. Catia's database and its ability to treat the entire vessel (hull, structure, outfit, systems, etc.) as one entity is simply astounding.

    If your needs run in that direction, then Catia seems like it would be a valid choice, along with SolidWorks and a few other solids-based systems. However, if your primary concern is fairing the hull, getting the hydrostatics and GZ curves, doing your drawings and collecting your fee, I'd say buying Catia is a bit like buying an 18-wheeler to get you to the 7-11.

    I'm attaching an image of a model that I did in considerably less than an hour from a single rectangular surface. In fact, I even wrote the tutorial on how to do it in a single evening while watching TV.:)
     

    Attached Files:

  11. The Loftsman
    Joined: Jun 2010
    Posts: 91
    Likes: 4, Points: 0, Legacy Rep: 41
    Location: The Loft

    The Loftsman The Loftsman

    Catia

    Good reply PhotoBoat Guy,
    It's all horses for courses, and unless you are going into mass production of Ships,boats,aeroplanes or automobiles then the software that does for the user is the one to use, remember the grass is always greener,etc,etc.
     
  12. bydgroup
    Joined: Nov 2007
    Posts: 56
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Barcelona

    bydgroup Barcelona Yacht Design SL

    Hi!

    I have been using catia v5 for already 5 years for designing and engineering yachts, sail and motor. (previously used Microstation 3D and Rhino)

    In the following link you can find a full project done with catia V5, where we have used the real power of it, which is being able to do the full project from concept design to production (cnc models, FEM, production drawings etc)

    http://www.bydgroup.com/proyecto/proyectos.php?lang=2&proj=167

    In our website all projects have been done in Catia.
    http://www.bydgroup.com

    Our experience has been great, and it can only be compared with UX or proE, although I find it more flexible.

    And I have to say that is true, its very expensive, but at the end of the day if you are doing a full project it worths it. The parametric design allows you to refine your project all time with the click of a button which is really helpful (if everything has been doing right). But you have to make your work properly structured in the CATIA way, and to learn it it takes quite some time, I would say year... or years. Its a completely different way to design if you compare it with rhino etc...

    Surface and solid modelling is great, and also the visualization is amazing all time.

    With regards to the Catia for yacht... let say that is only a pack of modules, which are needed in the yacht design industry. They have developed some plugin or connection last year with maat hydro + for hydrostatics calculations within Catia, as Catia itself does not have it, but we didnt bought it initaially and I found the connection to be very expensive to be bought separately. Also the have developed in the same plugin a weigh analysis tool, that allows you to place your weights geometrically, which is quite helpful.

    My recommendations:

    If you only design hulls, and some styling, but not doing production 3d models, then catia is not for you, you should better use rhino or similar soft

    If you design hulls, prepare cnc 3d models, do production 3d models with structure, piping, Hi quility surfaces etc, the Catia (or proE/UX) is for you.

    I hope this helps
     

  13. tuanshipland
    Joined: Aug 2010
    Posts: 18
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: HCMC

    tuanshipland Yacht Designer

    Hi PhotoBoatGuy,

    May you share your tutorial how to do that on Rhino? I really want to compare CATIA, Rhino with others. Share on this topic or send my email < tuanshipland@gmail.com >

    Thanks in advance,

    TuanShipland
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.