outdoor wooden mast storage

Discussion in 'Wooden Boat Building and Restoration' started by ChristopherMoon, Oct 19, 2009.

  1. ChristopherMoon
    Joined: Oct 2009
    Posts: 3
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Port Dalhousie

    ChristopherMoon New Member

    My newly restored wooden masts, varnished only, are lying on outdoor mast racks at the yacht club... any suggestions on what material to use to protect. Worried about UV Rays re: varnish durability. Poly tarps may create moisture issues...Sunbrella may create financial issues. Has anyone checked out the cost of fifty foot zippers? So any ideas?
     
  2. BHOFM
    Joined: Jun 2008
    Posts: 457
    Likes: 14, Points: 0, Legacy Rep: 247
    Location: usa

    BHOFM Senior Member

    Can you go to the Wal Mart in Buffalo and get a cheapie
    car cover. They are about $20/$30 and can be cut and
    sewn very easily.

    I cut down a medium size one for my twelve foot sail
    boat and had a lot of material left for covers for all
    the other pieces.

    I took out the center panel that was about eight feet
    wide and nearly eighteen feet long.

    They are not water proof. They breath.

    [​IMG]
     
  3. alan white
    Joined: Mar 2007
    Posts: 3,730
    Likes: 123, Points: 0, Legacy Rep: 1404
    Location: maine

    alan white Senior Member

    You can buy a product designed for the interface between a house frame and its foundation, called "Sill Seal" or similar, usually light blue spongey foam a quarter inch thick and several inches wide. You can spiral it around the mast snugly and it should seal pretty well. It should seal out the UV and rain and dirt. It costs little and can be reused.
     
  4. Hunter25
    Joined: Mar 2006
    Posts: 174
    Likes: 5, Points: 0, Legacy Rep: 46
    Location: Orlando

    Hunter25 Senior Member

    I would think the last thing you would want is to have the mast touched by something which could be scuffing it in higher winds. I think the best thing would be to cover it but not touch it to protect against this possible chaffing. Dirt can be washed off in the spring, keeping it pretty dry and out of sun light and with plenty of air flow around it sounds better to me.
     
  5. dskira

    dskira Previous Member

    This is by far the best advise.
    Cherrs
    Daniel
     
  6. alan white
    Joined: Mar 2007
    Posts: 3,730
    Likes: 123, Points: 0, Legacy Rep: 1404
    Location: maine

    alan white Senior Member

    Not at all. The product I mention is not going to move relative to the mast. It is a bit gummy in texture so it grips well. It is elastic enough to seal as it's wound around the mast. I've used it to insulate pipes outdoors in the winter and it stands up to heavy weather.
    Covering the mast with a "roof" is all well and good but it's not as simple and it offers less protection from moisture (dew) and airborne dirt.
    Either way will work perfectly well, however, for practical purposes.
     
  7. ChristopherMoon
    Joined: Oct 2009
    Posts: 3
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Port Dalhousie

    ChristopherMoon New Member

    Thanks for the replys...I've tried Tyvek or similiar product designed for wrapping a house. Said to be water repellent yet breathable. The advice came from a few who had tried and were happy with the product. I've wrapped the masts and will assess its success this spring.
     
  8. alan white
    Joined: Mar 2007
    Posts: 3,730
    Likes: 123, Points: 0, Legacy Rep: 1404
    Location: maine

    alan white Senior Member

    Tyvek has terrible resistance to the sun's rays, It degrades quickly, but TyPAR, it's competitor, which is silver in color, lasts for a decade in the sun without deterioration. If you have problems with tearing after a while, switch to Typar. Typar is also more protective of UV light penetration to the varnish.
     
  9. hoytedow
    Joined: Sep 2009
    Posts: 5,857
    Likes: 400, Points: 93, Legacy Rep: 2489
    Location: Control Group

    hoytedow Carbon Based Life Form

    Just an idea, untested: Spiral wrap it with Saran Wrap and spray the Saran Wrap with white or silver Krylon spray paint to reflect UV light.
     
  10. ancient kayaker
    Joined: Aug 2006
    Posts: 3,497
    Likes: 147, Points: 0, Legacy Rep: 2291
    Location: Alliston, Ontario, Canada

    ancient kayaker aka Terry Haines

    Another idea: if you have problems getting material with enough length or width, try double-sided tape sold for securing outdoor carpet. Its a glass fiber fabric with a very sticky black adhesive.
     
  11. PAR
    Joined: Nov 2003
    Posts: 19,126
    Likes: 498, Points: 93, Legacy Rep: 3967
    Location: Eustis, FL

    PAR Yacht Designer/Builder

    I think anything that physically touches the mast will have mold and possibly rot come spring when it's removed. This assumes that it doesn't rub the finish off the stick when the wind blows. Condensation alone can cause a bunch of issues and wrapping wood with plastic seems a marriage made for trouble, particularly without ventilation.
     
  12. hoytedow
    Joined: Sep 2009
    Posts: 5,857
    Likes: 400, Points: 93, Legacy Rep: 2489
    Location: Control Group

    hoytedow Carbon Based Life Form

    I would have thought keepingt it in a southern exposure to the sun would have kept it warm enough to drive off what little moisture could seep past the plastic wrap. Again, just a theory. Try it on a 2x4 first.
     
  13. PAR
    Joined: Nov 2003
    Posts: 19,126
    Likes: 498, Points: 93, Legacy Rep: 3967
    Location: Eustis, FL

    PAR Yacht Designer/Builder

    In the morning and the early evening, when temperature changes swing pretty widely compared to the day, you'll get condensation. This is one of the biggest reasons for ventilation in wooden boats.
     
  14. alan white
    Joined: Mar 2007
    Posts: 3,730
    Likes: 123, Points: 0, Legacy Rep: 1404
    Location: maine

    alan white Senior Member

    It should be noted that the spars are probably going to be varnished in the spring. Minor flaws will be sanded out. Two new coats of varnish will be applied.
    I'm lucky enough to be able to store spars indoors. But if I couldn't, I wouldn't mind wrapping spars up in just about anything that prevented the Sun and rain/snow from getting to them. Even a couple of tarps and duct tape if need be. The main thing is don't leave the wood exposed.
     

  15. hoytedow
    Joined: Sep 2009
    Posts: 5,857
    Likes: 400, Points: 93, Legacy Rep: 2489
    Location: Control Group

    hoytedow Carbon Based Life Form

    I suppose you could build a shed 2 feet wide and 50 feet long with a small heater and air circulation system to keep out humidity and condensation.
     
Loading...
Similar Threads
  1. Rod Tait
    Replies:
    1
    Views:
    875
  2. Rod Tait
    Replies:
    2
    Views:
    1,217
  3. WidowsSon
    Replies:
    14
    Views:
    3,157
  4. Josh Goodswen
    Replies:
    31
    Views:
    3,277
  5. Chris06
    Replies:
    2
    Views:
    1,210
  6. Rod Tait
    Replies:
    2
    Views:
    1,214
  7. Masjaf
    Replies:
    6
    Views:
    1,809
  8. Jeff Vanderveen
    Replies:
    18
    Views:
    3,759
  9. Rod Tait
    Replies:
    3
    Views:
    1,610
  10. Rodrigo Hurtarte
    Replies:
    15
    Views:
    3,339
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.