DynaRig MotorSailer, ala Maltese Falcon

Discussion in 'Motorsailers' started by brian eiland, Mar 9, 2007.

  1. Landlubber
    Joined: Jun 2007
    Posts: 2,640
    Likes: 125, Points: 0, Legacy Rep: 1802
    Location: Brisbane

    Landlubber Senior Member

    Pericles, no wonder women do not understand men, I would have been a pirate in another life, it really must have been a very adventurous time sailing around plundering wealth merchants. Today all we are allowed to do is go sailing still, but those times also will be limited if the dogooders have their ways, we would have to be licenced to go to sea, must have the manning, even if we want to sail solo or limited, have to wear hard hats, steel capped boots etc etc, "if it only saves one life"....oh please, let me go free.........

    She is truely a woonderful little ship... great that someone would think outside the square, but put the money on the table too....that is the hard part.
     
    1 person likes this.
  2. Pericles
    Joined: Sep 2006
    Posts: 2,015
    Likes: 141, Points: 63, Legacy Rep: 1307
    Location: Heights of High Wycombe, not far from River Thames

    Pericles Senior Member

  3. SeaSpark
    Joined: Mar 2006
    Posts: 593
    Likes: 17, Points: 0, Legacy Rep: 96
    Location: Holland

    SeaSpark -

    Sorry Pericles, can't find the "Dynarig not for sloop" article either. There have been at least three multiple page articles about Maltese Falcon in Yachting World and have got only one at home. I'm pretty, sure it was in YW but i can be wrong, i read a lot of magazines and many of them featured MF the past Year.

    I will try to find it.
     
    1 person likes this.
  4. Tad
    Joined: Mar 2002
    Posts: 2,321
    Likes: 214, Points: 73, Legacy Rep: 2281
    Location: Flattop Islands

    Tad Boat Designer

    http://www.hiswasymposium.com/symposium_papers.asp

    Included is the best paper on the Dyna rig application, see 2004 papers.

    JD explains that esthetics played a large part in rig geometry for Maltese Falcon. But in the context of an 87 meter vessel, certainly a single un-stayed mast version would not be sensible.

    Tad
     
    1 person likes this.
  5. yipster
    Joined: Oct 2002
    Posts: 3,486
    Likes: 97, Points: 58, Legacy Rep: 1148
    Location: netherlands

    yipster designer

    [​IMG]
    found Tads good link and this balanced rig while thinking and searching
    how a (up to 40% better sailing) aerorig may work in bi or A masts
     

    Attached Files:

    • rigs.gif
      rigs.gif
      File size:
      29.2 KB
      Views:
      8,056
  6. BigCat
    Joined: Jan 2008
    Posts: 73
    Likes: 1, Points: 0, Legacy Rep: 27
    Location: near Seattle

    BigCat Junior Member

  7. brian eiland
    Joined: Jun 2002
    Posts: 5,067
    Likes: 216, Points: 73, Legacy Rep: 1903
    Location: St Augustine Fl, Thailand

    brian eiland Senior Member

    Interesting Paper

    Thanks Tad, I had missed seeing this paper...probably as I only had a cursory interest at that time
     
  8. brian eiland
    Joined: Jun 2002
    Posts: 5,067
    Likes: 216, Points: 73, Legacy Rep: 1903
    Location: St Augustine Fl, Thailand

    brian eiland Senior Member

    Two Large Cat orders

    Just months after beginning the construction of a Sunreef 102 Double Decker, Poland's Sunreef Yachts has received an order for a 32m (106ft) multihull based on the exterior lines of the Sunreef 100.

    The new Sunreef 106 Sailing is being built for a European client, and its modern interior is the result of close cooperation between the Sunreef in-house design team and the yacht's new owner.

    ''We've been receiving many inquiries for large custom yachts which is gratifying and supports our strategy to build these kind of boats," says Sunreef VP Nicolas Lapp. ''With our first two superyachts due to be launched in the coming years, we have now achieved our goal to be recognised as a builder of large custom yachts that only happen to be multihulls."

    Headquartered in Gdansk, Poland, Sunreef Yachts specialises in luxury sailing catamarans and claims to be the first and only shipyard in the world to have under construction two multihulls over 30m (100ft). The company also builds monohulls and power catamarans, including the Sunreef 67 Power, which is due to be launched in April 2008.
    (1 April 2008)

    ...I knew I needed some exposure in Europe, Brian
     
  9. brian eiland
    Joined: Jun 2002
    Posts: 5,067
    Likes: 216, Points: 73, Legacy Rep: 1903
    Location: St Augustine Fl, Thailand

    brian eiland Senior Member

  10. schakel
    Joined: Jul 2008
    Posts: 386
    Likes: 16, Points: 18, Legacy Rep: 48
    Location: the netherlands

    schakel environmental project Msc

    I do not have a plate before my head

    Ha, Fun to joke when it comes to littelary translated dutch translations but to get to your design;

    Is that a skysail (a kite like the kite surfers?) kind of thing you were planning in your sketch. Great but the yacht is so heavy it benifits only a little when it comes to the uplift effect of a kite.

    http://www.youtube.com/watch?v=FP0x7naNZ0A
     

    Attached Files:

    • kite.gif
      kite.gif
      File size:
      31.6 KB
      Views:
      1,591
    Last edited: Oct 20, 2008
  11. brian eiland
    Joined: Jun 2002
    Posts: 5,067
    Likes: 216, Points: 73, Legacy Rep: 1903
    Location: St Augustine Fl, Thailand

    brian eiland Senior Member

    That sketch was just at the point of launching the kite, not for lifting.

    ....more here
    New Age Trawler/Motorsailer; Kite assisted PowerYacht
     
  12. dskira

    dskira Previous Member


    Did you do a cost estimate compere to a more classical rig?
    Cost is often the difference between possible and impossible.
    The MF was possible because a large amount on money was pouring in without restrain. It is not a viable model for any boat.
    But if your simplified the rig to a cost at the same level as a, let say, a full batened classic multihull rig, why not? And they are not cheap.
    Cheers
    Daniel
     
  13. brian eiland
    Joined: Jun 2002
    Posts: 5,067
    Likes: 216, Points: 73, Legacy Rep: 1903
    Location: St Augustine Fl, Thailand

    brian eiland Senior Member

    Bi-plane, bi-rig version

    That is what this fellow is proposing, a bi-plane version:
    http://www.boatdesign.net/forums/sailboats/square-rig-variation-30031.html
     
  14. brian eiland
    Joined: Jun 2002
    Posts: 5,067
    Likes: 216, Points: 73, Legacy Rep: 1903
    Location: St Augustine Fl, Thailand

    brian eiland Senior Member

    'Bare Bones' Version

    I did no cost comparison as I had no final alternative configuration yet. But this other subject thread has me thinking about a 'bare bones' version....buildable in back yard. Started writing and sketching a bit yesterday, but now headed to Florida to visit an old friend for a week. So probably won't finish that until I return.
     

  15. richard sauter
    Joined: Mar 2010
    Posts: 21
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Bali

    richard sauter Junior Member

    Misadventure past chartered waters

    DynaRig sounds impressive, but a sail by any other name is not much of a sail if it doesn't function as a well designed wing. When it comes to determining the best sail design there are no uncharted waters. It has been proven time and again that nothing beats a Wing sail.

    Why venture past chartered waters when what you seek is staring you in the face?
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.