Main-less rig

Discussion in 'Multihulls' started by Spiv, Feb 10, 2008.

  1. Pericles
    Joined: Sep 2006
    Posts: 2,015
    Likes: 141, Points: 63, Legacy Rep: 1307
    Location: Heights of High Wycombe, not far from River Thames

    Pericles Senior Member

    It's very innovative for 2002. It seems it could get some lift from the bow wave being swallowed by the amas/floats, in a manner similar to the Landau 20 cruiser.

    http://www.selectyachts.co.uk/landauhome.asp?ArtID=261

    Although the A frame mast may have more drag, the main sail running up the vertical wire luff will not suffer the 30% wind shadow effect of a conventional mast and better performance from the sail area should be the result.

    http://www.runningtideyachts.com/

    Thanks for showing.

    Pericles
     
  2. Spiv
    Joined: Jun 2007
    Posts: 221
    Likes: 16, Points: 28, Legacy Rep: 207
    Location: The Big Wide Blue Brother

    Spiv Ancient Mariner

    That is an interesting rig, fully self tacking and easily reefed/furled.
    The A-frame seems very strong, perhaps could be made lighter in composites???

    Would be good to hear from the owner or someone who has sailed it.
     
  3. Spiv
    Joined: Jun 2007
    Posts: 221
    Likes: 16, Points: 28, Legacy Rep: 207
    Location: The Big Wide Blue Brother

    Spiv Ancient Mariner

    ZA001 A-Frame rig

    I just found this rig pretty new from S.Africa.
    The full set of pictures are here:
    Where have I seen that writing on the sail before?
     

    Attached Files:

    1 person likes this.
  4. Pericles
    Joined: Sep 2006
    Posts: 2,015
    Likes: 141, Points: 63, Legacy Rep: 1307
    Location: Heights of High Wycombe, not far from River Thames

    Pericles Senior Member

  5. brian eiland
    Joined: Jun 2002
    Posts: 5,067
    Likes: 216, Points: 73, Legacy Rep: 1903
    Location: St Augustine Fl, Thailand

    brian eiland Senior Member

    Garry Hoyt's Manta sailboat

    Congradulations Deepsix,
    You have just found some photos of Gary Hoyt's Manta sailboat project that I was asking for info about over here:
    http://www.boatdesign.net/forums/showpost.php?p=23420&postcount=8
    http://www.boatdesign.net/forums/showpost.php?p=23420&postcount=9

    Lets see if anyone else comes up with some addition info and photos. I'm still busy in Thailand
     
  6. Pericles
    Joined: Sep 2006
    Posts: 2,015
    Likes: 141, Points: 63, Legacy Rep: 1307
    Location: Heights of High Wycombe, not far from River Thames

    Pericles Senior Member

    Gary Hoyt's Manta

    Brian,

    On Serge's site, he lists http://www.multihullbuilder.com/ , so I've sent them an email about your request for more information. It's an interesting site with links to a number of building projects.

    PS
    Very good projects. A mountain of reading. One example. http://lydiusmarius.blogspot.com/

    Good luck,

    Pericles
     
    Last edited: Feb 15, 2008
  7. yipster
    Joined: Oct 2002
    Posts: 3,486
    Likes: 97, Points: 58, Legacy Rep: 1148
    Location: netherlands

    yipster designer

    witcheverway, i see benefits on a Main-less rig, who say's otherwise ?
     
  8. Spiv
    Joined: Jun 2007
    Posts: 221
    Likes: 16, Points: 28, Legacy Rep: 207
    Location: The Big Wide Blue Brother

    Spiv Ancient Mariner

    wishbone mast V3

    OK, so lets see if we can come up with a better idea:
    1. A rear set of spreaders (jumpers??) to which the mainstaysail is connected, as you said they tend to bend the masts, so if that load cannot be absorbed easily by the mast, then we could shift the backstays to the side of the masts.
    2. I did not draw the mizzensail, if we cannot use it, than we could shift the topmast aft a little to shift the CE aft.
    3. Two poles at the mast hinge point will transfer the load aft, be used as a lever to lower the mast and one could rig a bimini on them as well as use them to lift the tender.
    Even though I am answering to Brian, anybody's comments would be much appreciated.
     

    Attached Files:

  9. yipster
    Joined: Oct 2002
    Posts: 3,486
    Likes: 97, Points: 58, Legacy Rep: 1148
    Location: netherlands

    yipster designer

    :D here is somebody, i drew some dotted lines in your drawing, and here my thoughts:
    i like the idea but find the house is in the way keeping that masthead swinging aloft
    hinging from the hulls may be stronger and better fitting
    when also going with bi sails the masts can be shorter, lichter etc
    like the davids must, the bi-masts may be coupled to raise and strike parralel
     

    Attached Files:

  10. waikikin
    Joined: Jan 2006
    Posts: 2,440
    Likes: 179, Points: 73, Legacy Rep: 871
    Location: Australia

    waikikin Senior Member

    Stefano, thnx for the pm, I reckon the A frame rig has some merit, theres some discussion on multihull.net on a Wharram cat with one too. It's a lot like some "shearlegs" a simple kind of crane a mate & I put on a mooring service lighter so is well proven for dealing with compression loads in that regards. I,m not sure about the aft mast setup, maybe some extra reading on my part will help but the more extreme rake combined with the aft shroud angle will increase compression compared to a slightly raked option I think. Maybe an extra set of sheerlegs kind of like a gaff but kinda triangular intersecting at a cross member of the A will be better for when a "main" or aft staysail is required but the result will be the same once moments are consdered & must be countered with some backstays at the intersection. An extra set too at the lower end will enhance the easy lowering of the main masts. Hope that makes sense but its "late" here & at the wrong end of some refreshment for "clear" analysis. All the best from Jeff.:)
     
  11. Spiv
    Joined: Jun 2007
    Posts: 221
    Likes: 16, Points: 28, Legacy Rep: 207
    Location: The Big Wide Blue Brother

    Spiv Ancient Mariner

    The hull shape and the wheelhouse are just my weird results of having drawn that boat in Word, sorry.
    I thought of hinging the masts from the decks, but prefer to have clear decks for easy walking around, also the two posts drawn will be part of the main bulkhead and part of the sides of the house and protrude over the roof just enough to allow the mast to swing forward.
    Once lowered, the mast will rest on a cradle on the forebeam only for as long as it is needed to go under the bridges.

    You're right, the position and rake of the mast is only going to be dictated by where we want to topmast to be and that is going to be determined by the size and shape of the sails to have a balanced rig.
    The only design feature i would stipulate is that the forestays must be parallel to have a good slot effect.
     
  12. brian eiland
    Joined: Jun 2002
    Posts: 5,067
    Likes: 216, Points: 73, Legacy Rep: 1903
    Location: St Augustine Fl, Thailand

    brian eiland Senior Member

    Mapping of Rig Forces

    Sorry Spiv, haven't had time to review your proposal yet, but i will get to it.

    Meantime I did post a reply to a few postings on another subject thread I had started:
    Sail Loading on the Rig, Rig Loading on the Vessel
    http://www.boatdesign.net/forums/showthread.php?t=2293



    Hi Spiv,
    If you were to go to several postings on this tread including two of mine, # 38 & 45;
    http://www.boatdesign.net/forums/showpost.php?p=35689&postcount=45

    ...you will find my desire to employ the consultancy of this gentleman Chris Mitchell of NZ to help in this mapping of the rig forces in determining the optimum configuration for a particular new rig design. Granted it is more 'stactic oriented' rather than dynamic, but it could be an excellent indicator. If I remember correctly his prices were reasonable, and possibly he is less busy with the American's Cup no longer in NZ. I really liked the fact that some of college studies were based on this very subject of mapping the rig forces.
     
  13. brian eiland
    Joined: Jun 2002
    Posts: 5,067
    Likes: 216, Points: 73, Legacy Rep: 1903
    Location: St Augustine Fl, Thailand

    brian eiland Senior Member

    Main-Sail-Less

    ...some encoragement to continue with project. Here is a letter I received last summer, '07


    Hi Brian, my name is alan smith...I am looking at an Ian Farrier Design 39 foot trimaran....I have enough sailing experience both in chartering and racing to know that what you have postulated in your article on aftmast propulsion to be exactly what I have been looking for....I am 56 years old and with that comes loss of muscle mass and flexability.

    I want to world cruise and my biggest seagoing dilema is the mainsail. As you mentioned the full batten mainsail is a beast. i had considered putting a power wench near the mainsail for aid in lifting it....but when you are at sea and singlehanding...it can be so frightening ...when in the middle of the night
    some weather blows up quickly...your thoughts are muddled and you are trying to figure out your best course of survival...ha ha ...even on a rotating mast getting the slides to cooperate, the battens not to get hung up on the jiffy sail lines is no laughing matter.

    Recently while on a 41 foot Lagoon cat in Greece we went from 15 knot breeze to over 40 knots in a channel between islands. Now mind you, there were 8 of us board this monster of a boat. It took one steering into the wind, one on the mainsheet traveller, one on the mainsheet rope clutch and wench, two handling the mainsail...clawing like hell to pull the slides down, and one lookout watching the battens didn't get hung up in the jiffy lines...which happened several times...up a little...no, down a little,,,,no damnit...up a little you idiots...and so it went.

    With your idea we would have just furled the jenny half way and struck the mizzen and we would have been fine...It is a brilliant idea. Just fricking marvelous brilliant....

    Now I have a few questions for you....Sailing downwind....dead downwind....of course a spinnaker is completely out of the question for a singlhander...too bloody much work and nervous work at that..Ian Farrier has a good set up with the screecher on a bow pole...you can wing and wing the main and screecher if you get lucky with course desired and wind direction...but I am interested in what you would recommend for a 3/4 wind or full aft wind?

    Is the narrow hull of a trimaran going to present in back stay problems for the forward leaning mast? Does the mizzen need some sort of boom? What percentage decrease in mast height will effect the same capacity of sail area with the 3 sails versus two sails of a bermuda rig....

    Thank you Brian....I am hoping that you will take a few minutes to answer my questions...it is so refreshing for me to have found this article....your idea hit home like the truth of god...ha ha ...well, fair winds to you...alan smith
     
  14. catsketcher
    Joined: Mar 2006
    Posts: 1,315
    Likes: 165, Points: 63, Legacy Rep: 790
    Location: Australia

    catsketcher Senior Member

    My last word

    Hell all,

    I hope you won't take this badly but it is always easier to develop something well proven than to totally develop something brand new. If you want to pull the main down on a square run use good slides and no diamonds. Sail downwind most of the time with a screecher and it will furl beautifully and will pull the boat downwind by its nose.

    The planform of a large genoa has lots of induced drag due to its triangular shape so along with headstay sag the benefits of having no mast in front of the luff will be nullified. Especially if you can't enjoy the extra roach a main gives you - increasing sail area and planform efficiency.

    Many boats that rely on performance to sell - Melges, J boats, skiffs have large mains behind non rotating masts and do well. Even boats with rotating masts and free design rules like the NS14 and 18ft skiffs usually end with 3/4 of the sail area in the main - it has been proven to be the fastest by huge amounts of trial and error.

    The large genoa monos of the 70's (S and S, Peterson, Frers) have given way to short overlap blade jibs running larger mains. Mains are easy to tune, keep their shape in a blow, sail fast and make the boat nimble in tacking. If the main was slow then the monos would still have small main rigs but they accept the loss of unmeasured sail area and make mains bigger.

    You can make mainsails more manageable and I feel that your energy and talents could be better spent down this road. As stated before a wishbone boom tames a mainsail to a compliant helper and makes the rig cheaper with no traveller and large winches required.

    These commments are not designed to inflame or cast aspersions on your desires. Good luck in your endeavours.

    cheers

    Phil Thompson
     
    1 person likes this.

  15. Fanie
    Joined: Oct 2007
    Posts: 4,604
    Likes: 177, Points: 63, Legacy Rep: 2484
    Location: Colonial "Sick Africa"

    Fanie Fanie

    Phil, you've got to be kiddin. If nothing changes (or changed) we would still battle it out in the 1650's baoting rigs.

    Maybe in the future we could look back (since some of us will still be around in a few hundered years) and think the same of todays boats than we did compared to the 1650's. Check ?
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.