Helipad material

Discussion in 'Boatbuilding' started by 902twin, May 26, 2007.

  1. 902twin
    Joined: May 2007
    Posts: 2
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Germany

    902twin New Member

    Hello,

    I´d really appreciate if somebody could tell me, what kind of material is used for helipad´s on yachts.
    I searched the web and surprisingly came up with nil.
    We´re not discussing about Fregattes or akind, I need information for glassfiber or aluminium hull yacht helipad´s on 90´to 160´s .
    I´m especially concerned regarding the ESD (electro static discharge).
    How is this handled?
    Please, if somebody knows something useful, I´d really appreciate it.
    Many thanks.
     
  2. Eric Sponberg
    Joined: Dec 2001
    Posts: 2,021
    Likes: 248, Points: 73, Legacy Rep: 2917
    Location: On board Corroboree

    Eric Sponberg Senior Member

    Helipads are usually aluminum or steel. I don't think I have ever heard of a fiberglass one, although they could be so built. I don't think I have ever heard of anyone consider electrostatic discharge specifically. Whatever might be encountered on a yacht is also encountered on an aircraft carrier, and I don't thing there is anything special on an aircraft carrier to deal with that. Vessels, particularly of metal, are well grounded to the water by merely floating in the sea, and aircraft are insulated by virtue of their landing gear, specifically the tires.

    Fueling an aircraft on a yacht would be handled the same way as on the ground with a grounding cable from the fueling pump unit attached to the plane prior to fueling.

    Eric
     
  3. jehardiman
    Joined: Aug 2004
    Posts: 3,762
    Likes: 1,152, Points: 113, Legacy Rep: 2040
    Location: Port Orchard, Washington, USA

    jehardiman Senior Member

    As Eric said, I believe most decks are steel or aluminium. This is an load, impact and fire reason. I know that there is an agency review for OSV's fitted with them. Check with your certifing authority for their requirements.

    As for ESD, unless you want to do do VertRep, the skid whisker should take care of that problem.
     
  4. 902twin
    Joined: May 2007
    Posts: 2
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Germany

    902twin New Member

    Hello Eric,
    hello Jehardiman,

    yes, I know that the steel hull would be best, but unfortunately it is a glassfiber hull and the helideck is actually TEAK wood...

    I´ve seen a net across a helideck twice: once in a video where a Enstrom had a tail rotor loss but he han dled to stay on the deck and the other time in a picture of a 165´ superyacht with a EC130B4 in the back
    (http://www.yachtforums.com/forums/delta-yacht/3477-review-deltas-164-expedition-triton.html) In the third-last pic down there is the net below the EC.
    Have anybody heard of this net? What is it made of?
    Thank you for info.
     
  5. Eric Sponberg
    Joined: Dec 2001
    Posts: 2,021
    Likes: 248, Points: 73, Legacy Rep: 2917
    Location: On board Corroboree

    Eric Sponberg Senior Member

    902twin,

    I did not say anything about a steel hull being best. Certainly you should be able to put a steel or preferrably an aluminum helipad on a fiberglass yacht, provided the yacht has stability enough to take the weight up high. The pad would have to be bolted in place and the hull suitably reinforced to take the additional weight of the pad plus the fully loaded helicopter.

    I don't know what the netting is made of--if I had to guess, I would say Nylon webbing (seat belt material). If you "google" "helicopter nets", you will be directed to a number of company sites that sell them. They are similar to cargo nets.

    Eric
     
  6. Frosty

    Frosty Previous Member

    The aircraft is straped after landing and before finall positioning, rotors removed and the aircraft is grounded to the ships grounding system.

    The rotors can be removed by a non licensed mechanic but not re installed.

    Exhausts etc are covered and sealed, basically made good for the sea envionment.

    On arrival at a forign port communicate with the local airport whereas permission should be given to fly from the vessel to the airport and customs procedures taken care of and any ongoing flight plans presented.
     

  7. kc135delta
    Joined: Jun 2006
    Posts: 48
    Likes: 3, Points: 0, Legacy Rep: 17
    Location: Eastern Europe, for now

    kc135delta Junior Member

    Unless you have an A&P on board it isn't a smart idea to remove the blades, infact if you can help I wouldn't remove the blades throughout the entire voyage. You never know when you might need to use it in a hurry and constant blade change cycles wreaks havoc on the cyclic.
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.