Top  :  Top Rated Sites

  • Autoship  10.00
    Autoship
    Autoship Systems Corporation (ASC) provides leading-edge CAD/CAM software for vessel design and construction, on-board strength and stability monitoring and customized load and stowage planning. ASCs On-board and Load Planning software, Autoload is used at all stages of vessel operations. The program reads data from tank, draft, wind and SCR sensors as well as user-input, and then reports on the condition of the vessel. Autoload is often used in conjunction with ASC-developed load planning modules specific to a vessel type, eg. supply, jack-up, bulk, ro-ro, rig, etc. Ashore, the load planning modules are interfaced with the in-house booking systems and are used to create load plans which are then transmitted back to the vessel thus allowing more optimal loading in shorter time.   (Added: 24-Sep-1999 Hits: 99923)  My Links | Rate | Cached | Visit Autoship
  • Archive: FINE/Marine  9.88
    FINE/Marine is a Flow Integrated Environment incorporating High-Fidelity and Automated CFD Simulation dedicated to Naval Architecture. FINE/Marine put in synergy powerful full-hex automated unstructured mesh generator HEXPRESS, incompressible RANS solver ISIS-CFD and flow visualization and analysis system CFView. (Added: 6-Apr-2008 Hits: 6507)  My Links | Rate | Cached | Archive
  • Berserk Design  9.77
    Berserk Design specialise in the science of making travel over water more efficient, faster and more enjoyable. Designs optimised for their purpose. We work with all aspects of high performance boat design; stepped hulls, air entrapment catamarans, surface drives and surface piercing propeller design. (Added: 10-Jan-2010 Hits: 4823)  My Links | Rate | Cached | Visit Berserk Design
  • Archive: Argo-Design  9.72
    An independently owned company on beautiful Vancouver Island, British Columbia. Our objective is to work with professionals and the individual to develop 2D/3D graphical or artistic representations of their ideas. We use the clients thoughts on what they vision through their eyes and build a 3-D real model. This gives the client a better understanding of their vision. This will then be turned into working drawing to work from. (Added: 9-Apr-2005 Hits: 4595)  My Links | Rate | Cached | Archive
  • * What makes the tunnel hull work?  9.67
    A three-part article written by Jim Russell of AeroMarine Research which summarizes the main hydrodynamic and aerodynamic forces which must be carefully considered and skillfully balanced in the design of a tunnel hull powerboat. While the tunnel hull derives much of its high performance from air lift, it depends at the same time on its planing interaction with the water to maintain a stable and controlled flight. This interdependence of water and air force dynamics is the key to Tunnel design. (Added: 11-Feb-2002 Hits: 6585)  My Links | Rate | Cached | Visit * What makes the tunnel hull work?
  • FREE!ship  9.05
    FREE!ship is a surface-modeler for designing ships.FREE!ship uses subdivisiong surfaces rather then NURBS to create any type of hullshape. Further more, FREE!ship is open-source and totally free.   (Added: 5-Jun-2005 Hits: 117401)  My Links | Rate | Cached | Visit FREE!ship
  • Nupas Cadmatic  8.61
    Nupas-Cadmatic is a highly successful CAD/CAE/CAM hull and piping and outfitting 3D software solution. Specialised in shipbuilding software since its start in 1992. Which not only shows in its flawless use of the software, but also in its support. Having an intuitive and intelligent interface it speeds up design and modelling processes. By delivering error-free information directly to workshops Nupas-Cadmatic cuts production times, shortens preparation time and reduces waste material. Nupas-Cadmatic can be customised to suit your design/production standards and working methods. (Added: 12-Apr-2012 Hits: 8313)  My Links | Rate | Cached | Visit Nupas Cadmatic
  • Linnartz-Adema Houten Botenbouw  8.29
    Designs and builds small, open, sail, oar and motorboats. Kit boats include Lobster Sloop complete with materials for the hull, inside and out, centre boardcase and rudder plus a how-to-build video. Finished like this she can immediately be used for rowing or with an outboard. Heerlen, Netherlands. (Added: 9-Feb-2005 Hits: 7134)  My Links | Rate | Cached | Visit Linnartz-Adema Houten Botenbouw

Design Highlights

Search the Boat Design and Boatbuilding Directory:

 
 

  Gallery
 
  Forums
 
  Top Rated Sites
 
  Most Popular Sites
 
  What's New

  Boat Plans
 
  Books
 
  Designers
 
  Boatbuilders
 
  Materials
 
  Powerboats
 
  Catamarans
 
  Propulsion
 
  Sailboats
 
  Multihulls
 
  Software
 
  Resources
 
  My Links
 
  Search



The Boat Design Directory Copyright © 1998-2023 Boat Design.Net

Add URL  |  Advertising

Home  |  Top of Page