Hello all, I am progressing on a prototype, but can't seem to find a prop.:confused: The boat is a very small cedar strip runabout, like...
Alternate Method One other way is to use cedar strips and then laminate both sides with fiberglass and epoxy. It is the same method that is used...
Cedar strip or cold molding Do a small boat project with cedar strip or cold molding and epoxy / glass finish. It will give you a great finished...
I just like it... Just my thoughts on the issue: I build wood composite boats in both cedar strip and cold molded methods. I have been using...
Too expensive? Thanks for the link and I will look into it further, but it looks like I am going with a direct coupled 10 Hp electric start...
Dry Exhaust is OK with muffler If you lay it out right - and by that I mean provide air movement with a fan or some similar device - you could...
Or a home made jet pump? I have been looking at some of them, but the cheap ones are trashed and the good ones are really expensive. I was even...
I agree on sizing I agree with you on the sizing, I just ran some calculations and this hull is just not the right one. It is a small boat...
Hello gang - my first post to this forum. I am building a scale model of the attached boat, it will be done in cedar strip, very light. It is...
