anybody could sey me, What are the diferences between one 60º motor and a 90º motor, who is faster, and who is beter, Than you
which is the difference between one propela of polished stainless steel and an a propela of stainless steel covered with teflon, with the same...
it is the boat, it flat boat to fiching, but is a vee hull with 21 º dedrise
it is doing myself, but the hull is a magnum 16"
my boat is a 16" flat boat, with 140 hp loop charging year 89, with s.s. propeller 13 x 21, and in my revolution counter have 6500 rpm, and the...
Thank you Tom. this produces an increase in rpm or no ? , example a motor not loop charging has 5500 rpm and one loop charging will has 6500...
somebody can explain to me what means charge loop motor
I have 140 hp evinrude looper, propeller D13 x 21 S.S., It walking to 6500 rpm, but the manual says me that rpm must walk to 5500, the question is...
how is the maximum rpm for motor?
hello, my name is Cristian and i have a 16 feet boat like a vector hydrostreem whit a 140 hp looper with 13 x 21 ss propeller, but to maximum...
is ok, but all the faster boat doit that, whithou troble. but the question is how can control that in this design. thank you
pad design project and constructions hi!!!! everybody this is my project, old hull but very good performance, and i try to do better. Is a...
nitro 640
who belive ? about pad width = prop diameter rule of thumb
yes is a wide range of hullform, and has a 8" pad, and setback 8" too
i need help, no more confusions, plese anybody can to say me what size is better 6",8",10",12" wide pad to my boat.
a flat bit in the end of bow.
yes is a magnum 16Feet, have any informeition abut it. thanks
this is the difference between the original boat and the new one and this is the original boat
i get 2 pad types, the fist is: the wide of the pad is straight 12" and 5 feet of length, and the second is 12" but just 8" are straight and 5...