I'm repairing some areas of deck on a 33' race-oriented sailboat from above. 3/8" Balsa core. I've ground out the bevel in delam areas and...
Short steep choppy and sloppy seas are di rigour around here when the wind pipes up. I have noticed on several occasions (often after a tack or...
So much agreement on here, lol. FYI while the Santana 35 keel is a 63A012, the Soverel 33 is a 0012.
Thanks for the input guys. I don't have abbott & doenhoff but I'll see if I can find a copy. Averaging a couple foils (like the 0012-64) was...
Tim B.... That was the impression I was under, from things I've read such as vacantisw site, hence my question. The turbulent sections are...
I spent a fair amount of time carefully crafting some naca 0012 templates for my fin keel, as that seemed like the best compromise section for...
Ok, the H80 is rated at 5.0 lbs/cu.ft. The H130 is up at 8.1 lbs/cu.ft. The H80 sounds like the right density range. The boat is not very...
Never mind, my eyes are broken. Apparently Divinycell is the material to use. This from the IOOD 50 site: "Divinycell H80 is used in the...
Exactly. I don't see the point of not using all available boat size and speed potential, especially since my particular design excels most at...
So I've got this old DB1 sailboat on my hands: http://www.geocities.com/teamheatwave2003/heatwave2.jpg I'm thinking about putting together a...