Hmm, that's very strange. It would be very helpful if you could find the time to post a screenshot.
Dear NoEyeDeer, We've actually worked quite long on the new graphics and it should be significantly improved. All graphics are now completely...
The bulb shape on the photo's differs significantly from the one in the FREE!ship model. Also when looking at the pictures, and in particular the...
Typically boats and yachts are designed to the outside of the hull whereas ships are designed to the inside of the hull. So only for ships you'll...
That's correct, if you've enabled this setting in the project settings window
There seems to be some confusion. Setting a layer thickness in the layer window does not alter the hydrostatics. Specifying a mean shell...
I agree. I just indicated what is in my opinion the fastest route, not the safest. Besides, once translated most modern compilers will allow you...
I think porting the code to a "more generally accepted" programming language would be the quickest solution since it's a matter of simply...
No, both the GUI and the dll were sent to me in binary form
A few years ago, just after I started this thread (http://www.boatdesign.net/forums/design-software/pdstrip-free-strip-theory-program-11637.html)...
But it didn't, forgot to attach a dll file! :confused: This one does though....
Try the attached file, it should work
Try PCSail, it's a free VPP spreadsheet (if you can manage to find a copy) with pretty good results
John Winters has done a lot of research on this subject. You'll find a lot of useful information and theoretical background on his website
No, it's not (at least up to version 2.6) which makes it next to useless especially for small boats.
Both Delftship and freeship can export to Archimedes and ArchimedesMB (Added: Oops, someone already posted a similar reply)
By the way, your file toolbar seems to be missing. Is that on purpose?
Looks like you've used the wrong import routine (Import surface rather than import chines). While looking at your data I noticed both "chines" are...
Yes it can.
You cannot change the corner property if 3 or more crease (red) edges meet in that particular point.
