Somebody knows about Vacuum generators? could they be used? I see they go -27Hg and about 400l/min. The vacuum generators that I know of...
Well- knock me down- I was just at the DIAB site - makers of divinycell and they as much as admitted that my findings are correct- They are coming...
Jerry, If you are going to learn how to build a cataraman then you need to concentrate on the methods of building light and strong. There is a...
It could well be a characteristic of Divinycell . It would be interesting if any one else has run similar comparison test with other foams. When...
After reading your post I came up with more questions than answers. Are you doing clear stripped cedar canoes? If you are -what are you using as a...
Hey War whoop, You sound like you have had a lot of experience with resin infusion. Have you done it on foam cores and checked the total weight...
Thanks for the comments, Pre coated with a hot coat. No I am using epoxy. High vacuum- 29 inches of mercury for about an hour before infusion....
Regard question on steps to bag both sides- I repeated the CF,peel ply,release fabric and breather with feed lines and vacuum lines both sides. I...
The CF glass is much lighter but the foam took on a lot more resin when infusing. Hand layup I was 40 glass 60 resin and VF I was 65 glass 35...
Resin infusion I am preparing to build an F32 using Divinycell and carbon fiber with epoxy. I heard about resin infusion and became enamored in...