i will give it a go cheers mate
hey fallguy, the large hole i have put in aft transverse was because my tank was 20mm longer and needed to go into that transverse what would be...
Thanks for the reply and solid info I will give yous an update on progress cheers!!
Hey mate I have taken some measurements hopefully this is what you needed
Hey mate I managed to get some photos today I also went to a fibreglass shop to see what I could buy here and looks like I can buy 1708 and the...
Perfect guys thanks for the reply, I will go with your advice and run it to the gunwale makes a lot more sense to go there then all the way to the...
Hey guys thanks for the reply I can't get a photo of under the tank for a couple days. But as soon as I get home I will take some more detailed...
The fuel pick up has a long hose inside that sits about half way in tank. I could possible make this pick up hose longer to accommodate? I kind of...
I also didn't realise the filler would need to be higher then the breather in my head I thought it would need to be the other way round otherwise...
Hey guys , I would have about 40mm above hoses to the floor. Thanks for the reply. So my idea was to some how have the hoses running to back of...
Hey guys, I know you guys said it was bad idea but I have cut out the transverse beam and part of another one to be able to get my tank to fit as...
Hey guys im after some advice and help i want to fit an under floor fuel tank to my 5.5m leeder , I have cut the floor open where tank needs to...
