A couple of years ago, I was in the Marshall Islands teaching the locals to build 7.2m/24' mini cargo proas from ply/epoxy. I am now at the...
Foiler 50 under development. The first boat is being built in the USA. More coming as the project evolves.[ATTACH] [ATTACH] [ATTACH] [ATTACH]...
I was given a couple of rolls of flax cloth. before using it in the boat, I infused a couple of stacks of flax and fibreglass. Same weight of...
Lakwe (Hi) from Majuro, Marshall Islands. Been here a month, got the first mini cargo proa built and sailing. Great place, great people and a...
Bit of fun, a chance to win $500 and to show your understanding of fast boats...
After any teething troubles are sorted out, Bucket List will be sailed upwind and reaching. The gps recordings will be shown on...
Imagine building a composite boat where there was no wet laminating, no cutting or grinding of cured laminate and best of all, no fairing. Add...
The T60 is unique. It is a foam/fibreglass boat built with no cutting or grinding of cured laminates and no wet laminating. Not quite clean...
The boat at https://vimeo.com/127926604 is a 7.5m/25' proa. It has a fixed foil under the 4m windward hull. 300mm chord, 12% ogival...
Flasharry is a 50' harryproa for the owner and his mates to access remote surf locations. Requirements are that it is quick and easy to...
I have been asked to solicit papers on non fossil fuel propulsion for commercial vessels for an international conference on marine propulsion in...
G'day, I have posted some photos in the Photos section of the Yahoo Harryproa group of the windward hull being built at the KSS workshop last...
G'day, Video taken while delivering the 15m/50' cruising Visionarry down the New South Wales coast. This boat is about 40% heavier than...
G'day, Most builders have read about the Kelsall KSS technique http://www.kelsall.com/methods4.html for rapidly building boats and wondered if...
Have you ever wondered what the fastest rig and hull would be if there was a limit on sail area, but everything else was open? cat, tri,...
G'day, Further to recent posts, we have just completed an 18m/60' unstayed mast for Visionarry, a 15m/50' harryproa (www.harryproa.com)....