I'm looking for a fairing crew or a shop that can handle getting a 30' express sportfish to prime. Any leads would be appreciated. The hull is...
I'm ready to drop in the new fuel tank on project TOPAZ and since the boat is now an twin outboard boat will I need bilge ventilation? What's the...
Does anyone have the Dupont Imron code to match the color of a 1989 Grady? I would even take a Alwgrip # and cross it if need be. Thanks, Chris
Has anyone used microcrystalline wax to form a radius in a temporary mold? I have to radius an inside corner of a mold, it will be almost a 2"...
I was recently asked to help install new electronics on a friends boat, only because he knows that I can fix fiberglass. I think avoiding the...
Hey All, Project Topaz is still moving along. I'm at the point where the hull is done from the rub rail down. Transom and bracket are finished...
Hey All, I'm looking for some sort of sheet material, similar to formica, but more flexible. I have to line a mold with 2" radius inside...
The Topaz 28 project is finally at a stage where it will see some water! Many of you were nice enough to reply to my posts over the last 3 years...
I am now in the process of building some small molds for my Topaz 28 project. The tackle centers, bench seats and some cabinets have many inside...
We're finally at the stage of our 28 Topaz project where we are going to mount the twin 225 outboards. We are building the alumnium bracket next...
Does anyone have a tried and true method of prepping an epoxy hull prior to applying Duratec VE fairing primer? Had a few problems in the past and...
Need a tried and true method for prepping a fiberglass hull prior to the application of Durotec vinylester fairing primer. Had some problems in...
The truth hurts! A few guys responded to my previous post about esters over epoxy, thanks... you were right. I contacted Durotech about using...
We are at the deck stage on our 28 Topaz project, the deck is biax /epoxy over balsa core and want to know if once the faring is done , can it be...
We have all the glass work done on our 28 Topaz project and I thought I'd bounce this subject off the pros. We are trying to achieve a yacht...
We are at the fairing stage on the 28 Topaz project and as posted early, we needed spray on fairing material. To make a short story long , Duratec...
Progress... Slow but sure
Does anyone know where I can obtain a copy of the ABYC standards and tech reports? I am not a member nor a professional boat builder and would...
We're down to the fairing stage on an express style sportfish and have got the hull sides pretty nice. The last thing we sprayed was a "high...
Anyone interested in helping out again with these mind-numbing calculations? I recently posted a thread concerning the position of the fuel tank...