I have been working all day every day in the boat and have actually reached my own deadline of getting the walls cut and fitted yesterday. I have...
Painting the hatch frames and building the base for the bed. [ATTACH] [ATTACH] [ATTACH]
More progress. 1. Made some new floorboards. 2. Cut two holes in the rear and welded in frames for the hatches. 3. On the inside most of today...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] It's the same kind of product as Armaflex just slightly cheaper. And I wrapped it...
The Kaiflex I have used is the self adhesive type and it is a very strong glue. If you try to pull it off again it tears apart. It is working...
Thanks, I have decided to make some frames and weld them to the hull. It will be a bit more work, but it surely is the correct way of doing it.
I need your some advice on how to mount two Gebo 560 x 560mm hatches in the rear wall of the hull. The hull is slightly curved both ways, which...
A lot of progress have been made in the boat :) I decided to stop thinking about how to mount the strips of wood to the ceiling and just go with...
I actually have 2.5 liters of white epoxy primer (although a different brand) that I could use instead of the polyurethane. That would give me a...
I have never seen this much pinholes in paints before either, and btw I only brush and roll the paint, so no contaminations possible from a paint...
I have actually thought about welding something like small steel angles to either the stringers or the hull to hold the wooden frames. But then...
Yeah, I was a bit worried at first, until I read that rust is 7-10 thicker than steel, and I actually bought an ultrasonic gauge to put my mind at...
Thanks, it has been a lot of work to get this far, and now I want to make sure the insulation is done in the best way possible. We will most...
So I should cover the stringers and beams with thin foam, I have some 3mm thick 50mm wide strips, then use the 19mm between them and screw some...
Hi. I’m working on refitting our rear cabin and have removed a lot of rust and painted with good epoxy paint. Now I’m getting ready to insulate...