If your boat is kept in the water all the time I would not bother with gel coat below the water line. I would apply a barrier coat followed by...
If you want to keep this light you should use a decent structural foam like coe-cell divinycell or something like this. That way you don't need as...
don't use a heatgun Using a heatgun will produce epoxy fumes that are more toxic then liquid epoxy and breathing this can really f**ck you up. If...
I am looking at the same thing for a catamaran and I am contemplating using thru-hull fittings that way I can seal the deck and the opening can be...
Thanks PAR, that is the thing, load sizing wise I could be running a lot smaller wire but the smallest marine grade wire that I could get easily...
Before I found out that ABYC specifies a minimum wire size of 16 gauge I bought a 500' roll of 18/2 wire. I am wondering how important it is to...
I would NOT use bondo but instead mix some microballoons into the same kind of resin that you used to patch the holes, sanding is pretty easy and...