haha thanks I love your reply simple and elegant
yep indeed I was gona redraw it today but I didnt get the chance I am gona make it go from the keel to a 10 angle and then make it a round chin I...
Ugh, I'm making it so that it looks nice and I can sail it and about fishing, it's not my purpose. If I want to fish I'll spear fish. I just want...
it's mostly gonna be used for simple sailing , fishing once in a while , and yes il be on top because if I dont stand high the front end will...
I'm relatively new to boat building I've done some small projects so I will take you advice into consideration and do a bit more research on the...
yes indeed but on a 6m boat having a round botom will be highly unstable and want to role over
My good sir bajasailor is a great person an I am not denying that and as I have stated before I have only taken a slight bit of inspiration from...
If the weight of the boat alone is not enough, go up and look at the top photo you will see that the ship cabin is 190cm leaving 10cm for a...
First of all there is no chine; second I drew the transom at a 12 deg angle and the boat will sink 1m into the water an I believe that should be...
So I have redrawn the plans imgur.com https://imgur.com/D3h1dei The edge to the poop deck and to the front will be smoothed out This should be...
Well yes but I want to make it myself out of wood and also you said the transom should be around 12 degrees but can the botom were it meets with...
It will mostly be used for cruising and a bit of fishing and the max people I'll let on is 4 or 5; the water is relatively calm with medium wave...
thank you for the heads up I shall rethink my drawing cause this one is highly wrong
yes you are writing about the power and I'm just going to tell you that the sketch I drew here is prety wrong I am gonna redraw it today
Yeah I believe I did the measurements wrong; it should be a 6m boat 2m wide 2.5m high. The .5 is for the ballast 3.5 m high at the back and 3m...
Now that you mention it, I believe I have not drawn it correct. It should be 1 section taler from the bottom so that you can have a 50cm gap for...
hey i made a new post with a rough plan here is the link : rough plans for a boat https://www.boatdesign.net/threads/rough-plans-for-a-boat.65505/...
i recently posted a thread asking multiple questions and alot of people wanted to see a boat plan so i drew one out keep in mind this is my first...
I am interested in boat building and I realize a keel is an important part if not the most important part and I'm wondering how large my keel...
