The bendy thing is a tank rinser. It has holes in it. Its PEX. Its sealed in with through hull sealant or whatever its called .... The below...
Oh yeah lol propane heater was BAD IDEA lol i burned a spot on the bottom of the lid! I just chopped it out and redid it though. ALSO you...
By the way, it showers really good, no curtain at all! --- note the 'bondo with glass' making up a nice drain in the corner there! The...
Finished it. 5 hours 125-170f throughout tank, with heat gun and metal bowls. And laser temperature thingie. The VE was gnarly. The 2000e...
Im going to VE layup the rest and let it set, then heat up with propane heater that night for 5 hrs. Or maybe the next day. Within 24 hrs....
Thanks moderator
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
I have added them to an album on here, i don't think they have been yet moderated. Its like 15 pics
I have added them to an album, but it does not seem to yet be available...
I envisioned this thing, and now it time to pay the Piper! Wait for the pics, they're being moderated
Ok. So it simply won't cure without wax? Im in the middle of nowhere, and im simply exhausted from this truck build. Time won't cure it, no...
Some of the tank is against the wall and vanity. Plus the top is open; it is a separate piece. This tank is literally "glassed in place".
It is against 3/4 plywood mostly, so my layup is about 3/16 to 1/4 inch thick. Some of it i planned on going thinner, because its against the...
I was thinking that the acetone spray down would ensure that any leftover wax would not cause an issue, possibly floating to the surface like it...
It will. They are esters,they can mix. I suppose im just seeking validation on my ways here! Man this fiberglass thing can be a real...
Yes it is tack free by now
10 mil. Thats 160 sq ft coverage from 1 gallon. Its sewage, this is a black/grey tank.
Its inside. I have these supplies already. The outside is 2 walls, a vanity back, and 3/4 plywood. This is inside my living space.
I took on a creative waste tank design, and have glassed it in-place inside my RV/box truck conversion. It is solid: i have kicked it,...