Workshop, the construction part of the Maxsurf suite, will also do exactly that. Export your model as IGES, import it in Maxsurf and save it as...
Duplicate the surface "IN PLACE" Then trim the two surfaces with an horizontal line placed at the height of the antifouling line. Of course you...
I don't really think so. Boni 400 Hp engine is a well known in Italy engine. It is less thirsty than other comparable engines, and top power of...
We are at the moment on the completion of the project of a 42 ft sportfisherman. Two different boats will be built: an amateur one, for which we...
Hi pdavidson from what i can see in the pictures the actuall boat seems to have a constant V planning hull with a high length to beam ratio. I...
Rhino is quite good for getting surfaces out from side and top vew plans. You will need to build 3d curves from the two 2d curves, eventually fair...
Hi Raul, let me know exactly what you need. I may find something for you in my library
Hi Tim B as Andrew has already mentioned in a previous note, dynamic changes in the trimmed surfaces within Maxsurf require information that...
Hi Andrew, the box shaped tank is exactly what i defined as a particular case of tank because the LCG will not change by modifying the level of...
Hi Fede, Take a look at www.navaldesign.it FOTO GALLERY/GALLERY COMPLETA / 23 m vetroresina. You can contact me through the emails on the site
Hi Brant, Take a look at www.navaldesign.it/My_Homepage_Files/Page59.html and then click on the 23 mt boat images. As you can understand it...
I think one of the most important factors that determinate the use of one or the other type of actuator is cost. Solutions like those on military...
Hydraulic stabilizers do have their origin in larger ships, where hydraulic power lines exist anyway for other purposes as winches, doors ecc. so...
Changes in Bending moment Unless the tank or hold is of a vertical extruded shape, which is highly impropable in a real ship, changing the level...
Usually Hydromax results are correct. However, check that sections are correctly formed and, if you use trimmed surfaces, make sure you have...