Oh ok gotcha... yeah I figured I would have to make some cuts and over laps.. Thank you for your patience and understanding
I like this game plan yes for clarification the base layer covers the entire block of wood extending past the block on all side about 2 inches...
Ok so no 1.5oz csm fillet and then cover with 1708 Yes sanding sucks how much time In between do I have and not have to sand its laminating...
1. Ok so if I'm reading this right ( Bear with me I'm a novice) When you say stringer you mean the wooden block that I made up for the engine to...
Any one?
[ATTACH]
I have formed the blockes and glued them in place with pb. I will be using 1708 for tabing and wrapping the beds with poly Ester resin. My...
So put A light on it for 3 days and its all cured. I also used a syringe to see how many drops it would take to get 0.6 ml and it took about 21...
Ok scratch that lol it's cheap Ok scratch that it's cheap enough untill you throw in the $16 shipping
Yes sir that is definitely cheap enough
Oh I agree with that i just thought that when you said it's cheap that you knew of a place it was cheaper
Where is a good place to get it because every where I see it's about $16 an ounce
Ok what exactly does it mean to fair ? I see it mentioned a lot. If you are talking about feathering out the area for repair by means of removing...
Ok thanks I will pick a scale up for the future.. also when the direction's are instructing to 12 drops to 1oz are they talking 1oz in weight...
I only mixed up 1oz of gel and I used 14 drops of catalyst the temp was around 68 the gel started to kick in about 10 minutes so I hit it with pva
So I have a 1990 wellcraft 20 fish that when I pulled the outboard off to do repairs it also pulled the gelcoat off due to the sealant that was...
