Hi guys, I built a boat in Mexico but I'm having trouble registering it with the local authorities. They will only accept registration from a...
Thanks bajansailor! This is in a tropical environment in southern Mexico.
Hi guys, I am getting some freshly cut meranti 2x4s and I was wondering what the fastest way to dry the wood would be? I was thinking of making a...
Can you put vinyl tiles on cement board?
Thanks for the info about densglass dogcalvary!! I'm in mexico so it might be hard to find kurdiboard but I will look into it. Can I use cement...
Hey guys for the shower I want to use the densglass as the wall and 2 layers of epoxy over it and then vinyl tile over it so the epoxy serves as...
Hi guys I made a dumb mistake and forgot to mix the epoxy primer part a with part b and just applied part a to the boat. Now I have to remove it...
Thank you so much Dan I really appreciate your advice! I'm going to go with the plywood and I was thinking to epoxy coat the topside of the...
Hey do you guys know if I can use a fiberglass gypsum mat sheathing like densglass for the roof? I've read that you could but someone told me that...
Thanks for the response kapnd it would be for protected bay and it won't need to be moved. The floating house would be about 20'x10'
Thank you so much Dan you are the best! So are you staying for the wall studs I can get away with cutting 2*4s in half and just using 2x2s? Seems...
Also for the exterior walls, would you guys recommend a cement backer board like durock vs a fiberglass mat gypsum sheathing like densglass?...
Thanks for all the advice guys and yes rolling barge was one of the inspirations for this idea! For framing the wall studs, how important is it to...
Hi guys, I am exploring the concept of making houseboats using 55 gallon barrels as the floating platform. I was thinking of just using 2x4...
Hey guys thanks for all the tips! I called around and everyone seems to be out of stock in my location due to supply chain issues. Someone told me...
Thank you guys, you guys are awesome! Do you guys know of any stores that carry a rollable epoxy primer that I can pick up (without having to buy...
Thanks for the help guys good thing I didn't build the rest of the posts yet ill change it single 2x4s for the posts with 45 degree cross supports.
Hey guys does anyone know which stores (specifically in San Diego) that have epoxy primers that I can just get from the store? I need it to prime...
There are two posts to support each solar panel for a total of 8 posts supporting 4 panels
Care to explain? And how would you do it instead?