Thanks for the reply, this is great information!
Barry once again, great input here, thank you very much for your time and effort! I certainly have some things to mull over here. I just may rely...
Stringers, bulkheads and transom are finished! Just laid down 3 coats of Totalboat bilge paint, came out great! The paint was super easy to apply,...
I have never used a CAD program, would be fun to jump in and check it out. Thanks for the input!
Barry, thank you for the detailed information here. This is great stuff and seems manageable! I am in the process of building out a car tent so I...
Hey thanks, any input is welcome! I will be running the boards crossways 4 feet front to back. Figure I will have less sections by doing it this...
Good advice, thanks!
Thanks for the input, much appreciated! I second that three coats of Gel coat may be overkill. My only concern was the fact that I did the lay up...
Great suggestion! I used up all of the poly resin I bought, so I could certainly use epoxy on the deck!
Awesome advice, thanks!
Finally finished up the stringers and bulkheads this past weekend. I will be adding three layers of grey gel coat to the bilge, last layer with...
Pic of her before I broke it down....
Possum, she is a homemade 1977 18' deep-V Clam Poaching boat....The hull was based off a Donzi, I am told. But she is genuinely homemade, a hand...
Thanks for checking this out! Yeah it is rite about 22.5" from the top of the cut out to the V. Its a unique boat with a very deep V, it honestly...
Thanks bajandailor! Long time thread reader here, glad that I joined! Yeah this is my first boat build and it has been quite the learning...
Currently rebuilding an 18' V-hull. I have the boat completely broken down and it is basically a bare hull. I recently rebuilt the transom and...
