Low cost glass and epoxy vendor?
Started hand building plug. Power catamaran. 8 ft section of the middle sponsons and tunnel. Will pull mold from 8 ft sections and glass sections...
Anyone had a plug CNC milled lately? Idea of current cost?
Planing stepped hull catamaran. Ventilated steps
Looked at Gerr's scantling system gives hull thickness as LOA/ 1000. A 30 FT boat would require .0.36 inches plus 15 % for bottom plus 10...
Contact me at 321 417-2103
Thinking of cold molding a hull w Carolia flare. Plywood. Kerf in x and y axes for compound curve?
I'm at 321 417-2103
Send me your cell number or email can't seem to attach pix ht.
Anybody interested in collaborating in a new boat build in Florida?
I'm building an assymetrical cat and the foil will use boron or galvanized rebar.
E mail me at ryborunneryacht@gmail.com Or call 321 895 6616
Absolute best thing I've found is to apply lightly waxed freezer or parchment paper to the release surface. It's inexpensive and can be applied...
Cape Canaveral Florida USA. Rybo Runner Yacht announced filing of 3 patents that promise to revolutionize the boat building industry. 1. A...
Best mold release iv found yet. Grocery store parchment paper applied w spray adhesive gives the easiest release I've found to date.
NANOCORE by thge Farside Global group looks really promising. apparently its a corrugaed tube system inside composite skins using a proprietary...
Seeking advice on material for hydrofoil on hysucat (10 m x 3.6 m). Have used expensive stainless steel in the past. Considering carbon fiber and...
Would a 40 percent resin to 60 pct reinforcement ratio by weight be a reasonable real world target for a vac infused laminate?
Thinking in terms of a prius like hybrid system that would allow much running to be done off electric motors. In a fishing boat for example run at...
They have done some ferry boats in scandanavia w on shore recharging. Thinking a diesel generator for reccharging like an old u boat?