Why does that Scream Mouse Trap!...?
And also German for "The Boat"... as in the boat in question.
Das Boot [img]
Finally got it mounted today. What a Cluster... I get this catalog in the mail from HF... 2 ton engine crane (cherry picker) for $179. I can...
[img] From this pic I get... rollers connected to the thrust mechanism driven by the back wheels and the front wheels are in slots that...
I have an '88 Suzuki Samurai sitting in my back yard. I used it to deliver pizza in for a couple of years, however... the heater just couldn't...
It's funny... I had an 88 Chevy Sprint Metro (Suzuki Swift)... an '88 that was 1800 lbs soaking wet, carried 2 adults and 2 kids comfortably and...
On a trip back from Rend Lake, my Shepard did that and I spotted her in the side mirror. I laughed so hard I almost crashed. My daughter, who was...
The original power assisted.....
The material here was bought purposely for the tray but I used some scrap metal for the wheel plates. The wood is from the odds and ends bin at...
I built this out of scraps to use on my small lift cart so I could reach the level of the truck bed when my band saw was delivered. Then I...
To the tune of "Secret Agent Man"?
Next up is an A frame with a come along to lift it up onto the base. I'll make a pair of them (take apart) so when the time comes to flip the...
Spent my morning today building this: [img] I was going to do it yesterday but people showed up. Those wheel plates are 1/4" thick Stainless...
Actually the saw came with roller bearing guides... and I can order the double roller bearing guides that come with the next higher grade saw....
OK... so I put it together this morning. It took me about 2 hours just to assemble the saw part. I haven't attached it to the base yet nor have I...
I expect you won't see 10 mph unless you go with a very high thrust 24 volt motor. You'll pay for that with a lot of battery weight... 80-100 lbs...
for my keelson... Holy Guacamole! It costs more for the shipping... almost twice as much... as the board itself. Even cut into shorter pieces it...
Closest I can think of is a Bolger Skimmer... but if you want two together you'll need to widen it 8 inches to a foot and lengthen it to 9 ft....
One of these years I'll be there in person... with bells on!!!