I would like to know others thoughts that know more than me, When I removed the previous fiberglass that I cut out to get to the core, the layup...
[ATTACH] I am contemplating a bulkhead change idea! The white area is the area I would like to remove. The black line I am thinking is a glassed...
[ATTACH] I am working on a full restoration of an Alberg 30. Been sitting on the hard now 3 years while I work on it. 2 years ago while...
I purchased an Alberg 30 couple of years ago and doing a complete gut and refit. I have all the major bulkheads in and tabbed and working on...
I have Installed 6 bulkheads and a chain locker. Going forward how does one determine how to balance out the boat. I am searching for...
I have gutted and am completely rebuilding a rebuilding an Alberg 30. I am wondering and researching information about building nonstructural...
I am restoring and modifying an Alberg 30 from a complete gut. I have all the main bulkheads in and deck stepped mast beam in and about to start...
If I lay my mast out and connect the boom, layout a 6, 8, 10 measurements to get the boom at a pretty perfect right angle. My simple logic tells...
I am wondering what the effects would be on my Alberg 30 By raising the boom. 7", I realize I would have to have new sails made which I have to...
In the process of rebuilding my Alberg, I made a pattern of the angle of the chain plates before removing them. Currently and sadly I have lost...
I've decided to pull my posts.
I have an Alberg 30 I am restoring.. Winters I am inside and summer working the outer hull. This boat had extensive crazing. The surveyor look at...
I am rebuilding a Alberg 30 complete gut and am putting it back together now... I have been looking at the bilge for a while now and there is only...
This seemed like a good forum to run a proposed water tank system in my sailboat. I have built 1 integrated water tank aboard my sailboat, food...
In the current process of a complete rebuild of Alberg 30, I am contemplating cutting in new portlights for more light and for visual above the...
Let me preface this with I am a novice.. I am restoring a Alberg 30, complete redo...eventually I will be blue water sailing again on this new to...
I am completely restoring a Alberg 30 1969. I have been researching a lot about installing a single row of longitudinal stiffeners (foam under...
Hello all, long time reader new poster with a question about moving a Lazarette Bulkhead in a Alberg 30. The bulkheads are on either side of the...
