front on and side on after spray, sand and buff. I gave it a coat of white as a base then 3 coats of yellow, last one with 2% wax in styrene,...
When money/careers/profits are involved the truth is in the wake, not at the point. Sometimes I wonder if regulations just are about controlling...
faired up waiting for my safety yellow gelcoat to arrive-
throw that TV away first thing you do!
Someone that wants a 10/12m boat and wants to spend a truckload of money to save 50lts/hr :rolleyes: Just kick it back to 6knts and you've...
rough water cruise speed is way better with a single outboard
233 Formula Platinum - the golden child of the Edencraft fleet https://www.edencraft.com.au/233-formula-platinum/ What I don't get is people that...
boats like this one- Corey Gauci Marine https://www.facebook.com/coreygaucimarine/photos/pcb.1053898864767599/1053898841434268/?type=3&theater
This why I used VE in my latest 'blow some dough" effort, has the secondary bond ability of epoxy and a window for chemical bonding that epoxy...
have the fluid cash, time and the eyes of a owl, mind of serpent- its like stealing a surfboard off a kid that goes to buy an icecream, leaving...
the torch and marking out the grinds
You are proud of your efforts, you can say " I did that!", its not so much the labor to make it happen, its the thinking it thru and exploration...
you fell in love with a slick deadrise! hmmm I see that! ;) Cut a bunch of 2" holes with a holesaw in the deck, if you cut 25% out of the deck...
It needs stringers between the bulkheads. You need an engineer. Like the concept is great idea for liveaboard coastal hopper. Put an outboard on...
It will be too late then! - this boat is so narrow you must finish the welds on inside on the way up to the gunnels. The other thing I don't like...
put a torch inside the hull and mark out any cracks- grind them back to the inside skin and patch them with layers of csm. then coat it all and...
remove old gelcoat - makita 9910 belt sander with 40grit.
redesigned stay mounts- stronger, don't interfere with the locker lid and look a hell of a lot better then the originals as they mount inside the...
hook also helps low speed planning, but with increased powers bogs down the bow
Finished the inside layups(still got stowage boxes and joint taping to do internally), have started to fit up the hulls to the decks- will use...
