Firstly, thank you for your thoughts and response. By partial penetration weld, I mean any groove weld that does not penetrate the full...
Thanks for the response. I guess to expand a little bit, I already have design drawings with the weld prep being a 3/8" single bevel with...
Hi, long time no post! Should steel bollards on a tug boat always have a partial or full penetration weld when welded directly to the deck...
Hi all, Wondering if anyone would be able to share any structural midship drawings for offshore supply/support operations vessels. I've done a...
Ad Hoc, this is exactly what I was asking for. Not saying this is the only way to go.
Thanks (again) for the great responses Ad Hoc and TANSL. Just for the sake of this thread, I've attached what I found in ABS. Cheers
I am indeed a Nav Arch student. I appreciate your answer. Indeed, the availability of types of stiffeners would affect section moduli and hence...
Thank you, I really appreciate you sharing that ratio that may be correct. Exactly the type of knowledge I was hoping a senior member to drop....
Hello all, Very general question I guess, but I'm wondering if supply vessels, say 80-90m would usually be transversely framed. If so, what could...
@TANSL @gonzo Many thanks to you both. Cheers
Could anyone point me in the right direction on where to find rules for scantling calculations for an aluminum catamaran? Concept is a 15m...
Thank you both for responding, especially jehardiman. I realize that there is no clear cut answer but rather these things tend to get ironed out...
Hello all, I am but a naval architecture student. I am researching to begin a new concept design for a small tugboat (14-15m). Voith Schneider...
Hello, I'm a naval arch student and I'm working on a concept design for a small tug. There aren't many high level requirements so I'm just...
I am currently working on a concept design for a small tug. I am a student and I am very new to GHS. I modeled my hull in Rhino and exported a...
Wow! This is more than I was ever expecting to get. (Also first time posting here). Thank you so much!
Hello all, I'm currently working on a concept for a small tugboat and I'm wondering if anyone has a midship drawing of a modern tugboat?...