Thank you KapnD, You answered my question of how the bow was supported before I thought to ask it. I agree, I can’t find any evidence that the...
I’m not sure where it stoped
Thank you Ondarvr and missinginaction, I appreciate all of the help. The craftsmanship seems to be pretty good on the original stringer. The...
Thank you so much fallguy, I appreciate all of the help. I will post some pictures as it gets going. I am guessing that when I start removing the...
Finally got the time to get the transom in, tabbing it in soon
Sorry for another stringer post but I’m at this point and see lots of different options on what to do. I am dealing with a single 12 ft stringer...
Thank you all, It took over 24 hours but it finally cured. I took the advice of moving the transom into a hot shed. That seemed to make the...
I don’t see a date anywhere. I am afraid it may be old. There is no wax but my main concern is it’s not hardening correctly
I have limited fiberglass experience, but in the past I have worked with it under the sun and in higher temperatures. The polyester resin would...
I am in Florida, currently 72, probably high 60s overnight.
I started working on my transom project and I am running into Fiberglass problems. It seems to be staying wet and tacky. The two 3/4 plywood I...
Transom going in this week hopefully
Thanks fallguy, you are the man!
Thank you for all of the great info, I will try to find plascore. Just to clarify, you are saying that will work for the casting deck as well as...
Thank you, The casting deck is 5ft 11 inches width by 4 ft. The floor is 3ft 11 in by 12ft 8 inches 2ft from Center stringer to the side No...
Thank you, it’s a flat floor and then casting deck in the bow. A non wood core has been recommended to me over and over but if I need molds I...
Can anyone recommend a how to video for replacing a deck/floor with honeycomb or a product like Air cell t60? I can’t find any on YouTube
Thanks Blueknarr, I will grind it away, seems like like whoever did the last repair didn’t do any grinding before the new glass. I think they...
Any advice on the gelcoat under the glass? It’s that what it looks like to you? Will the new glass be ok to stick to that layer?
Kinda looks like there is gel coat under the old fiberglass. Do I need to get this off or can I glass over it?