If I went with the plywood, I would need minimum of 4 sheets of okoume. Plans call for 3/4" planks. The plans also state that if desired, it can...
If I use plywood for the keel and runners do you think they will hold up if I fiberglass them. I live in the Catskills, upstate NY. Most of the...
Ok, here I go again. I have decided on a boat to build. Originally I was leaning towards a jonboat. I have decided to build a skiff, a 14 ft, flat...
Thanks for all the info and and help. I feel I need to clarify what I am looking for. I used to look at jonboats and cringe. I prefer boats with...
Thank you! I believe that the old magazine plans you refer to are the same ones that prompted me to start this thread. Lol! I prefer plans that...
It's a matter of preference. I have been in several Jon boats. Both with straight sides(same at the gunwale and chine) and with about 2-5 inches...
How do I change the side angle from zero to about 12 degrees on a 12-14 ft Jon boat with a side height of 16-18 inches. I found a few articles...