You might find something suitable among these: Absolutely Free Boat Plans http://absolutelyfreeplans.com/boat.html A 10 1/2 ft Skiff | Free Boat...
It is no small task to create a set of complete and accurate lines from a scale image.It is a good way to learn the basics of lofting,while...
I would take issue with the notion that we Europeans don't have the same heritage of development type classes.It may not be spread uniformly,but...
Without wanting to appear too cruel, I believe it comes down to two factors;liability and commercial reality. The business in question has no...
I think that in the context of something we are describing as a centreboard,there won't be a need for ballast as the ballasted version would...
The simple alteration is length,all you have to do is increase the station spacing a bit to achieve the length you are aiming for.You can use...
It could be an interesting concept to experiment with.I can see the appeal of trying for a flexible surface that would be moved to imitate the...
I used the term decks because the stripper canoe people use it to describe what I would call breasthooks and I wouldn't be shocked if there were a...
Polyurethane foam will work but if you have any offcuts of the better PVC foams that would be a little better.Normally a business that uses cored...
You can use melamine faced chipboard,the sort of thing that a lot of kitchen furniture is made from.As far as finish is concerned,it isn't a huge...
I have yet to make a plug that needed a second mould taken from it,but I have had to amend a few so that a new mould could be made that...
Having recently had a debate on this forum where it became clear that using one type of unit for CSM and a different type for cloth are regarded...
Would it be to much too ask the advocates for super tough plugs to explain what forces they believe the plug will be exposed to?Once some numbers...
That clarifies things,a simple centreline split in the mould ought to suffice.I would have built those support frames a little differently,with a...
I have never encountered inch thick oak as a plug material and don't actually expect to as it has several disadvantages;cost and toughness being...
I wouldn't recommend attempting to flex the mould for it's release from the plug.It ought to be too stiff for that and you may find yourself...
When you mention CSM what weight will your CSM be?For something with the curvature of a kayak hull I would estimate that a total layup of around...
I agree that a location of Phil isn't really helpful,could be the Philippines or Philadelphia or some other place.Now would we really expect a...
I find it a bit curious that nobody has raised the point that it will need to be attached to the deck and it is something that needs to be...
The French word for steel is Acier and it may be that the S or Z are references to particular types of steel.