Check this file. Hope this helps.
[ATTACH]
Here are some photos that may answer your questions. I also show my kayak outrigger version that I sailed before. [ATTACH] [ATTACH] [ATTACH]...
The sail plan will be set on a mast of about 12' or 13' ( 1 1/2" alum extrusion with a sail track ). The jib is approx. 10 ' high with a 32"...
The principle of this drive was derived from ideas on the internet. I don't have photos of it alone but I will post an exploded sketch in the...
The seat has an adjustable back and will swivel 90 deg. to either side to counter heel on a tack. If this proves impractical ,( as in needing to...
Hello again ; It's been almost a year since my last post. (page 5 to build a small beach cat ) I spent the better part of the season building my...
I don't know if my input will be of any help but here goes. As I understand it the resin in fiberglas is not really water proof. A barrier coat...
The rudders are doubled but the kick -up center board will be slightly off center (to allow for the propeller shaft) but centered between the...
The hulls will be mounted externally one on either side of the stern, under and supported by the SS baskets for lack of a better term. They will...
Towing is really not an option. We already have an elaborate arch with davits for our rib, 4 solar panels, gps antenna, satellite tv antenna,...
Sorry if I sounded snippy. Not intended. I thought my post specified slightly larger than the kayak and to be knocked down for storage. Sorry the...
Hardly a replacement for a 45' cruising liveaboard. Design length 8-10 ft. to be knock down for storage on "Babeeze" and for speedy fun sail only....
Hi all. I live for part of the year on my sailboat, a Hunter 45CC in Mazatlan Mexico. We are moored in marina Mazatlan most of the time although...
