It’s not so much a stepped chine as it is a spray rail. Some of the boats I was ‘competing’ against were Bateau’s SK14, everything by Salt River,...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
Wanted to brag a bit... about two years ago I started designing a 14’ micro flats skiff with Chris Morejohn of Hell’s Bay fame. After building a...
Especially if there’s an underside to glass. I rarely measure a specific amount of epoxy. With the 2:1 RAKA I use cheap, clear plastic cups....
Exactly as stated above. I’d probably laminate width wise in shorts strips, maybe 36” cloth, versus length wise. Doing it that way would hopefully...
Always had good luck with RAKA through three builds now, so it gets my vote, but their surprise shipping costs piss me off. No amount of epoxy...
Www.captive-skiffs.com I’m biased, of course, but Ill cut you a deal on the drawings. This isnt a step-by-step guide though, just dimensions and...
There isn’t much bow up front. I helped design (as in offered what I wanted and had someone else draw it) a similar skiff, but capable of a much...
Correct... I have a bad habit of interchanging these two that goes way back.... The only real sharp corners are along the hard chine, everything...
Oh jeez... realized I messed up the question. What it should have said was MOLD schedule, not hull. The hull schedule we have down. More just...
We did not. Have enough confidence in what the models are telling us that we decided to go ahead and build a few for personal use. Since we wanted...
Okay so, plug is underway. Ended up digitizing the drawings in solidworks and doubling the amount of bow stations, then having those CNC routed...
That’s pretty much exactly what we’re thinking, just with different products. 3/4oz mat to cover the sanded foam, then we were going to fair with...
So we’ve come up with a new design for a 14’ flats skiff and are having the bow stations we created in SolidWorks cut at a fab place in Atlanta at...
Present policies change quickly, and me do frego anyway. Just curious.