The moment should be F x L giving 100 kN x 250 mm = 25000 Nm Bending stress on the rod bar should be 286224 PSI with the deflection of 8.1 mm....
The load goes to the deck plate, shell side plate and the L profile between transversal L profiles (frames 800mm apart). Deck is 10mm, shell is...
Hi Ad Hoc, thank you for your reply, my answers underlined:
Hi all. Is there any "approximately correct" way to calculate whether the supporting structure could withstand the force of 100 kN without using...
Hi, I am refreshing this topic because I have the same question. Ship design with flat deck - how does the flat deck affect on minimum freeboard...
TANSL, thank you so much for helping me in such a fast and very much understandable way. I get these results: [ATTACH] THANK YOU one again...
Please, if anyone can help me with on how to calculate section modulus for a deck beam partially having a hole on it, and by using CAD "massprop"...
Yes, like power unit, as rate of energy transferred per unit of time (sec). The energy Joules => one Joule per second => one Watt Suppose, or this...
Hi Heimfried, thank you very much for your reply. Also have to mentioned that you helped me big time regarding the previous discussion we had on...
Input: - Thermal conductivity of material (W/mK) for shipbuilding steel: 41,84 - Cross Sectional Area (m2) (suppose area of steel from ship plate...
Edit: [ATTACH]
Heimfried thank you very much. Your reply is the exact thing I was looking for at the first place, while opening this discussion. I will make the...
Heimfried you are right, ty. It was way past midnight in my country, my brain was overloaded, stayed till 5 AM studing this issue lol. Can you...
How can I have no ambiguity? Regardless, thank you very much for your elaboration. Will study your input. Can you help me as well with...
I have edit my post before adding info that this is a barge, to make it less confusional, so only 2 gensets and already mentioned equipment/pipes...
Yes, only two of generators which requires airflow for combustion + airflow for evacuation of heat emission from all of the ER equipment including...
40000 m3/h (around 11 m3/s), is the result I have for required ER airflow, since there are other equipment in the ER, not only generators. Are the...
There are two ducts, so 2 x 0,3 m2 - resulting 10 m/s each? (Sum of Air-out cross section is 0,6 m2 - 6/0,6=10)... or I am doing it wrong, again?
Scania Diesel Gen OL 621 C / HCM 534 C - 265 kW (I missed "2" in post above regarding kWs)
:( At least something I said is correct. So, there are two diesel generators. each 65 kW Edit: to be less confusional, it is a barge.
