I have the flexible diesel fuel tanks listed below for sale, located in Fairfield, Iowa 52556 USA. I have them listed on eBay at the moment but...
I've been stripping a Zodiac Hurricane 733 rigid inflatable I used for a circumnavigation in the early 90's with the intention of refitting and...
Hi...if you would sell the HC5345 separately please let me know the price. thanks. bryan
I've solved the problem but the question relates to the lifting tool referred to in the service manual in the section on "Lifting Information",...
Hi...I'd like to make a lifting tool for a 1998 Johnson 150 outboard - can anyone tell me what thread size and bolt diameter will be needed? any...
thanks for the quick reply. Unfortunately, the manual warns against using any grease with graphite so I'll need to find another alternative....
I'm getting ready to put a boat with a used Hamilton jet in the water for the first time - for the thrust bearing the manual says to use, “Marine...
thanks for the input...found the materials. I'm working directly from the manufacturers plans on the design and materials specs so feel confident...
Thanks for your quick and helpful reply. I've gotten quotes extensively but in the midwest they don't typically stock aluminum suitable for salt...
I'm looking for less than a 4'x8' sheet of 5086 or 5052 sheet aluminum, either 5/16 or 3/8 thickness. I'm making a transom extension to hang...
I've been unable to locate a source for 1.25" stainless steel rail fittings, the type used to assemble grab rails by using pre-fabricated...
I'm looking for a set of hoses that serve the hydraulics on a Hamilton 273 jet. If you know a source other than the manufacturer, or somoeone who...
I'm having some modifications done on an outboard transom bracket/extension and need less than a full 4x8' sheet of .25" 5052 sheet aluminum (or...
Yes, but Im hoping to find used manuals at less than retail prices.
thanks very much for the reply. I've been searching on Google, and here, without success. If you happen to know of a specific web site I would...
I'm reconditioning for resale a 1993 vintage ex-Navy 10 meter rigid inflatable boat that has twin Hamilton jets, model HJ292. does anyone know...
downwind would be fine for me because I only need to get within 500 miles of my target, then can use the fuel and engine to the degree necessary....
Here's the link to the Hamilton video download page: http://www.hamjet.co.nz/index.cfm/The_Hamilton_Waterjet/Control_Videos but I'm having...
thanks for the clarification Dave. I surrender...can't be done.....
Check the Electric Wheel offered by Solomon Technologies (.com), or better yet contact Dave Tether who developed and brought it to market - has a...