Always wondered about the 3m stuff. Can it be used in direct sun . I don't have a cover to work under .. also can a past wax be used on a buffer ?...
I never did either , but it's getting old and everything likes sticking to it . And it will chalk if not done.. like last time
So I've tried meguries flagship wax it last for a little while . But I'm looking for something that will last a long time . . Boat it a 21 ft ,...
I'm not outside and the temp is in the 85-95 range here during the day
Well I made a little test before I used it on my part . Went with 18 I made a test batch before I used it on my part. The chart that I found...
So I was stuck buying resin from the local boatyard today for a quick project I was doing . Turned out not so quick . There's no mix ratio on the...
I can get a gallon with mekp for about 55$ thay give you 2 oz of wax for free . Its from fiberglass site .com has lot of good reviews
Expensive wood would be a waste on this. Boat is kept inside on trailer . Just use it for brim fishing. I might need new resin. This stuff is...
Im good with epoxy . Just have to use cloth , and fair with a mix . Just hate the long curing times
Im thinking theres wax in this polly resin due to the fact it cured so hard . I mean it was about 85 outside but i catalyzed 1.5 % . Im about...
so as a learning curve I have learned laminating will cure to a hard finish and not be sticky / tacky after sitting for 24 hours or so, WHY ?...
Wow lots of good info . Sounds like it will be safe to go with a random orbital polisher . ..
So i tired of waxing by hand . My boat , wifes car , my truck ... Meguiars is all i use so i will be using meguiars no 50 cleaner wax inside the...
So whats the trick to glassinh around sharp corner?
I used 1.5 % .. i didnt know laminating resin would fully cure without covering it . .. guess ill use it . Its not for a structural piece any way...
Will laminating resin cure to a NON tacky / sticky finish if left long enough ? Reason i ask is i have some that was from a small repair i made 6...
I didnt thin it . I was just thinking it would have to be layed thick for a good cure and would run . But ll try to recoat when first coat is...
So im finally getting around to a few projects iv been needing to finish .. the gelcoat i have has wax in it . Can i thicken it with something to...
What is the mix ratio for the wax additive i can get it locally at the boat yard store . Lets say i need to add wax to the final layer on a small...
It would probably be faster .. but rather use the poly that it just sit there . He gave me the quart of resin and gelcoat just cause i get so...