Boat is GONE! Has found new owner. Thanks to all.
Still available. I'll send you some more pictures per your request
Thanks for all the interest. She is still available and FREE. Your only cost is transporting her to your location. Also many have asked about...
img]scan0003.jpg[/img]
I give up, With so many other projects and a new baby last month, it is time realize I'll never get to the boat. It is free to a good home...
Here is there web address. Hope it helps. I recived some eamples from them a while back. Looks like good stuff. Stiff with no flex though....
The boat is a 1980 Sea Ray 31' Sedan. Fiberglass of course, except the wood substructure and floors. I know this the the wooden boat forum but...
PAR, What size fastners do you use in this joint? And do you also epoxy it into place. I am using several coats of CPES on all stock but...
PAR, I can't thank you enough. That is a great detailed explanation. I have read many of your posts and always very informative. Thanks for...
PAR, Thanks so much for the advise. I tried asking these questions many ways and finally you understand what I am doing and asking. Maybe the...
I'm rebuilding the cockpit sole and the original support framing was 2x4s. I'm considering laminating some marine plywood to make the supports...
The 6.2 is a chevy diesel motor. It was known for cracking heads. They usually crack from the water jacket to the exhaust valves. That said, I...
burt2, What are you going for,...similar performance with the diesels or strictly functional with the best fuel economy? I have thought of the...
I am repowering because the old 5.7 is dead. The transmission is a Velvet Drive 72C and was recently rebuilt. I have come across a deal on a...
Gonzo, I too am planing a project with it and had some questions. I was thinking of using the 3/4" Bluewater. Which grade did you use and...
Here's a link to another coating I did some research on. Looks good but I'm still several months away from ready to try it....
JR-Shine, Do you use more than one layer of 6oz on your decks? I'm now ready to glass the cockpit in my 31'. I have 3/4" MDO which will be...
What is the best design for drain gutters on a cockpit hatch? I plan on a large 30"x40" hatch and want the bildge to stay dry. I don't want to...
forestjohnson, I'm working on the same project and was wondering what ideas you come up with? I tried to locate the cd at Bertram31.com b ut was...
Anyone know of strut suppliers? Looking for bronze to accept a 1.5" shaft. Thanks, Danny