Hi Rumars Thanks for your response, yes your description is correct. The sunbrella doesnt shrink so has stretched slightly making it plenty well...
Thanks fall guy Any reply is good, appreciate your time. Relieving it shouldn't be bad with a router table, so happy to do that. My description...
No not dense.. just not a good description... :) a picture may help.. the yellow highlighted area is the panel (really old photo) the canvas goes...
HI Guys Hopefully a simple one for you. I am making some walking board for the rear canopy - previously these were 18mm ply.. they sit on some...
Hi KapnD Agreed mufflers need fixing / replacing but this is a short term fix to stop the turbo's getting 'wet' when stationary and engines off...
OK further to this (its been a while) I have now managed to strip my exhaust system and am thoroughly baffled about what I have found! - The one...
HI Guys Weird one here.. and probably something I wouldnt have noticed if I had not redone my wiring / battery charging etc. circuits. As part...
And to keep things up to date.. the as built layout - it may help someone in the future [ATTACH]
OK after some debate with myself - I have now built a small jiffy box with a 15w PSU (240>12v) and a cradle mount Relay DPDT. This has been added...
After some more research - yes the VSR's do screw with the chargers which is why they are never shown.. blue sea show some options here Solving...
Im with you on that Iron Price I am in the process of doing the work (its taking ages as I'm only getting the odd hour here and there and its a...
Hi Gonzo There are no drains at all in the Mufflers. They are locally made and therefore don't have drains (stupidly) i'm thinking a stainless...
Hi Rumars Thanks for the info on the mechanical starters The crank batteries are Calcium / Calcium Bosch 31-1000MF batteries - 1000CCA in a...
Hi MIA Thanks for your replies - as my original post may be a bit vague I will reply to your post by quotes - I hope you dont mind but its easier...
Nope but its only rated to 120A which should be fine as thats around what the alternators are. Steve
In theory - the vsr should control that behavior as it should turn off if the crank gets too low, therefore stopping the house draining everything...
They are fibreglass so I would be looking at using a tank connector / Bulkhead connector to get the valve onto. I can get access to the inside via...
Well by removing the water I am thinking that for extended layover, the exhaust will be able to breath the warm dry air we have here, whereas if...
Hi Gonzo The VSR takes on the role of the Diodes, without the voltage loss and in an intelligent manner (ie voltage based operation) - the charge...
Hi Guys Further to my previous post I have been doing more work on laying out and overhauling my electrical systems on my 40ft boat. Sorry this...
