Interesting I did read that the famous Ian Farrier had mentioned that his F9AX, the extra wide waterline version, might be slightly faster than...
Salut Philippe! Interesting design. I'm a total amateur, but would share a couple of thoughts if you don't mind. 1) The cockpit looks like a...
Because constructive critisism is about the best you can give anyone. In my opinion, if not directly rude, it is actually generous and shows...
Since my last post in the other thread, I did ponder much of the same questions as you have. And I do agree with points 3 to 9. Especially cabin...
Kurt Hughes Multihull Design - Catamarans and Trimarans for Cruising and Charter - 61' Catamaran Ferry...
Dear Shrijeet If I understand correctly, your main subject of study is structural engineering. And that you have not yet focused on hull shapes,...
My only objection is cabin- and decksides (upper freeboard) design. Love all the rest of it. And I really get the design for market SOR. But in...
Wow! Awesome project. Thanks for a very interesting link!
Sounds like a very good deal! Here (Sweden) Okume/Gabon is priced 60% to 200% higher than birch ply. And I don't mean the cheap stuff.
I have read that one reduction gear causes less than 2% loss. Meaning, better to get the highest efficiency engine. Would probably yield higher...
Ps not entierly sure on the price quotes. It was on the phone 3 or 4 years ago.
Www.wbptrading.se
The best i could find was around 16€/sqm for 4mm okume and 20€ for 6mm, inc 25% vat. Local B2B supplier but willing to sell small quantities for...
Really sorry to hear about Skoota. Painfull to see such a nice boat damaged that bad. Can only imagine what it must feel like for you. The joy and...
Actually the idea is similar to the Woods Duo but even more so to the Winboat F-Rib 430. Just smaller in size. Can't upload a picture. Easy to Google.
I think it's low weight comes from the fact that it's basically a supersized windsurfer. Thin laminates not for banging around (guessing), and...
Hi! Carbon can be pretty cheap these days. Factor in that you'll need less weight and less epoxy. 9oz, 300g/sqm should be pointy. If you calculate...
Thank you! Very interesting article, and exactly what I was looking for.
No, I was thinking about distributing a fixed displacement to extend significantly aft and/or for of the actual hull. Reason 1) increase effective...
Thank you mr G! Love the fact that the knowlegable pros here on BDnet so often come to the rescue. I really appreciate your anwser. You make a...