Thanks rwatson. I would flare the midsection and somewhat flatten the v midships in real life. Good point about tying her bow up. On the one hand...
Cheers, I saw that one on woodenboat forum. Thanks for the advice on plywood thickness. I am not concerned with the adequacy of my scantlings....
Johnhazel, thank you so much. That is great information. I now feel confident to go with a skinny planning hull. About 4.5m waterline length and 1...
Thanks for the eloquent reply.
"It is not the deadrise which is the deciding factor for a boat to go smoothly. It is much more important that the bottom width is correctly...
Thanks very much for the link. The design brief was very educational for me. I think that bottom would pound in a steep chop at 9 knots but that...
PS is it the lack of volume forward and lack of flare aft that make you think my design looks poor?
Thanks Rwatson. I don't want a flat bottom, I've built a 16 foot banks dory and don't like the pounding. If I were to follow a design I'd probably...
Sorry for the disjointed posts. I don't have a computer and am clumsy with the smartphone. Thanks for your patience.
[ATTACH] A and C represent midships sections without and with the strake. B and D represent stern tramsom sections without and with the strake...
I'm also wondering about creating a spray rail/lifting strake by running a chine log along the outside of the bottom panels at their outer edge,...
[ATTACH] Bottom planking would be 6 mm ply, side planking would be 4 mm. Probably glassed inside and out with 6 ounce cloth in epoxy. Could anyone...
[ATTACH] [ATTACH] My latest thinking is leaning toward a monohull. Here is a model. Length is 4.6 m, beam is 1.2 m.
Dennis, thanks for the link. Rwatson, will let you know of any developments. Thanks for the blue tri link. I know all about how it goes with...
Thanks everyone. I have studied all these options and came to the forum because none of them seemed fast enough, or were fast enough but not...
Tha Thanks Dennis. Yes I do mean an outrigger, my terminology was wrong. The water is cold where I live so a super skinny, wet boat is not an...
Hi folks. My name is Alex and this is my first post on the forum. I have designed and built a houseboat and some rowing boats and have learned...