I do not care what is built. Using the foam, fiberglass mesh with maybe the base coat that we use to do the EFIS stucco system could get you a...
Another thought. I run a stucco company and we use large blocks of foam 6" x 24" x 48" to make shapes ( key ways, curved bands) It does not absorb...
I built a 5' x 9' removeable cabin top/dingy with 1.5" packing crate foam core, .25" ply and epoxy/fiberglass. Mostly to be light, test shape and...
Am I right to understand that you are thinking about: 1. making full size "test " boats 2. Keeping cost of "test" boat under say $1000 each?
Mr. PAR and all thanks very much for your insights. I have greatly enjoyed thinking through all your points on my stuff and other sections of this...
Cool boat! Thanks for the link. I was going to do the well boxes on the stern but had not seen it done and did not know what they were called. I...
Thank you for the clear explanations. The real trick for me at least is deciding what I want the boat to excel at. I tend to want it to do...
The Wee Hunk dory design a bit longer comes close to what I am thinking. Thanks for thoughts. We all know that with any design there are gives and...
Thanks for the welcome and the thoughts. I will power with 40 tiller steered outboard and will cruse at about 15 k. Coastal waters mostly with...
Hello all, I am building an 19' long, 4'6" wide, flat bottom lake skiff. The stern 2/3 is flat then the bow rockers up 10" to a 25* raked bow. I...