Thanks for taking you the time! I might have been vague on how my intended solution was going to be on the "hull side". It is supposed to be...
I looked into this a little bit....could be a solution. But I might would recess the beams instead so it goes flat with the deck. There is a solid...
Well, thank you for trying to help out :) Yes, aft of main sheet track by about 15-20cm. Exactly! One on each side of the deck hatch! Yeah, it...
Hehe, Im from Sweden, but located in the tropics :) But yes, I wanna put seats on the aft deck on the mainhull, that extends over the water. I...
So I need some advice from you guys! My plan is to build two seats on my aft deck that extends outside the deck and hangs over the water The aft...
Im planning new installation of a below deck furler but need to make a new chainplate for the forestay...but cant have any chainplate mounted in...
Ok. wrong by me to call it varnish! It's a urethane I mean. The grey paint I have already bought...So it will be painted with a singel stage...
Inside a cabin
Thanks for you reply! 1)About your concern about slick floor....you are right! The green thin stripe we are making non skid. 2)Varnish is...
I'm planning to paint the floor inside my boat with a 2 component paint, single stage. The floor will be painted with a white color 2 inches wide...
Blueknarr! Thanks and good idea about coloring the epoxy...never thought about that.
I will be rolling striple it...
If mixing epoxy resin and silica...rolling it out so it gets a texture.....when do u paint it with polyurethane? When it is gelling or let it cure...
Thank you for the reply. To describe the boat a little bit more. It is a performance cruiser. The total weight is around 7000 lbs. The beam of...
Have been thinking about to remove my saildrive and engine from the boat (46 ft sailing trimaran) and replace with outboard. At the moment engine...
I MIGHT have added too little wax in the gelcoat. It feels 90% good. Not really tacky...but not perfect. Can I use a regular wax on top l...and it...
Yeah I hav heard about the wax paper and celuphane...good idea. For some shelves I'm making...I have nidacore honeycomb. Formica on both...
Yeah I know about PVA but it is hard to find in central America. Ok...So the polyester won't cure if sealed from the air with epoxy? Or is it a...
I'm building new countertops at the moment. If I apply non waxed polyester resin....will it cure when I pour the epoxy on top even if it is days...
I will change the angle by less than 1 degree. It shouldnt be that much of a difference. The move is just about 20-25 cm.