Selling a two piece flats, boat mold set hull, mold, deck, and liner in one mold with built-in nonskid gutters with three Hatche molds. Took on...
Will i had the great opportunity of meeting with Mr Morejohn in person one of the founders of hells bay. I have been trying to get professional...
[ATTACH]
So I got my cap mold almost ready hope to get 2 parts out of it mast plug and a cap for next hull. The tables made out of melamine join together...
Wow the the panels are excellent. I'm not doing multiple layers of 1208 one layer of 1208, the Prototype boat was one layer 3/4 chop strand mat...
3/4 csm thin 2408 will print through really bad already as it is if I use a dark color on my skiff the 1708 will print through
Skiff drafts 5inches in mud 6 inches in sand. The 20 hp Suzuki is a great and is ligher than the 25 2stroke. I am going to build a second skiff...
No roving was used at all only 1708 and csm
Ran the boat with 2 guys and gear 22 mph top speed with 25 hp Yamaha enduro 2 stroke tiller. She drafts 5 inches of water her real performance...
I would like the boat to carry 2 guys fishing gear, how fast doesn't really matter to me but i do have access to a 40 Yamaha 2 stroke tiller i...
I have lots of questions and looking for advice after floating the hull out of the mold. Using a garden hose and city water i glassed in a fitting...
The skiff is 15 feet 8 inches long and at its widest its 4 feet at the deck and 3 feet wide at the transom. I designed it as a tiller skiff for...
[attach][/attach][/attach][/attach][/attach]
[ATTACH] [ATTACH] [ATTACH] I fared the floor and layed 1708 from floor to hull side i was going to to a 1/4 foam core for the hull side...
[ATTACH] [ATTACH] The hull was filled completely with 5 lbs closed cell foam all of the foam used in the skiff is closed cell also i used...
The hull is 3 layers of 1 1/2 csm then i filled the keel with mix of cabosil and chop then a layer of 1708 from transom to bow. i then put chop...