26 foot motorsailer x 10 foot beam x 4 foot draft with twin keel, cutter rigged 550 sq ft. Headroom in the forward cabin is 6'2". Aft cabin...
Trying get some feed back, good or bad, as long as it is constructive feedback! My interpretation of a 26' X 10' Motorsailer. Draft keel down...
My interpretation of a 26' X 10' Motorsailer. Draft keel down 6.5' keel up 2.5'. Displacement 6 500-7000 lbs. Keel bulb 1300 lbs, Keel plate 1 700...
Working on this design, Comments good or bad welcome. Lenght : 26 foot Beam: 13 foot Draft: 2 ft CB up, 7 ft CB down Displacement : Light 9 500...
Comments on my design is welcome. The type of bow is called a "Bullnose bow" and the type of sailboat is called a "Pugboat", a cross between a...
I was not aware of the designer Mr. Benford. I have been looking at boat plans for quite a while now and never heard of him. After finding the...
[MEDIA]
I am designing a shallow draft sailboat in the in the catboat ratio 26 foot LOA , 13 foot BOA, 2 foot draft centerboard up. I am trying to see...
I am reading Dave Gerr book ''Boat Strength''. I was wondering were do the scantling come from. His own experience or a standard? Also ISO 12217...
This design is the study of a Center cockpit catboat with an aft pilothouse, intended for coastal cruising (weekend and week trip) with a family...
Here is my mordern interpretation for a catboat hull. This is the link to the Fusion 360 viewer. This way you can get a good 3D view. A360...
Anybody ever tried to use a submersible motor, the one used for submersible pump. Like the Grundfos MS motor. Would just need to fabricate an...
Any discussion here about Outboard jet drive for displacement boat (Sailboat). Can't find any helping info if it was tried and what was the...
This is my Solution for an outboard installation on a 42 foot shallow draft schooner. There will be a box covering the outboard that will act as a...
I would like to know if anybody as experience with the design and sailing of a Centerboard Gaff Schooner. [ATTACH] I am trying to locate the COE...
I have two complete laser rig laying around that are close to brand new. Looking at Cheers video the sail ratio look very similar to the one from...
I just downloaded the Freeship software yesterday. I would like to know about the model that gets generator when starting a new project based on...
I am interested in the design of Rueul Parker Exuma 46. My objective, if I am crazy enough, is to build a sailboat to cruise the ICW, The island...
Anybody knows were I can find more vid, info or people that built the Coral Cove 31. I am interested to know more about it.
Pahi 31, Windsong or Coral Cove 31. Am I Crazy enough to start building a catamaran! Ok, I just bought all the study plans that seams to make...