Competition Composites Inc (previously known as "Phil's Foils") is seeking an experienced composites fabricator to join our team. Duties...
Its not that simple With all respect, if you are asking that question, then you probably don't have the knowledge to successfully build a new set...
Why a Lightning? Is your heart set on a Lightning? Big, heavy, expensive, sailed with 3. The Fireball has active home builders and would be...
We're open minded about that, but have not as yet had to look into what's involved in work visa's etc. Send me a CV. Cheers Phil
Competition Composites Inc (CCI) is an Ottawa, Ontario, Canada based composites fabrication business. We focus on high quality one-offs,...
We've also used teflon adhesive films on the tables, but the seams were not acceptable and they did not wear well over time.
I should clarify that we are not new to laminating on steel tables - we have two other tables in the shop, each 8' x 16', and last year did about...
Its simply a large steel laminating table for infusing flat panels etc. My supplier has recommended we simply shoot it with Duratec VE then...
Really? Just the Home Depot 2-part stuff, or is there better?
We've got a large steel table (8'x20') that we just had the mill scale sandblasted off of. Now we've got a clean but pitted surface that we'd...
Ian's pretty clearly stated that he'll get more return for time if he concentrates on getting the F22 to market (and other production builds after...
I'll chime in on the side of those recommending some central structure to the strut. You need it for both a shear web, and for compressive...
Unfortunately we just can't think of a cost effective way of accurately shaping the cores to Doug's required radius. Not on our 3-axis machine...
One other detail while we're on the subject - be careful if building to a design that calls for rectangular section trunks with daggerboards that...
If there is core involved, then both sides have to be 'glassed. If your daggerboard(s) have a simple rectangular cross section in the head,...
re: "Classic Moth" ... good background here http://www.mothboat.com/ We've built a few rudders & daggerboards for these over the years, there...
Take a "classic moth" hull form, add wings for comfort, add a kite for downwind fun......
We developed an alternative rudder for a Catalina 38 this spring for a customer intending to do some offshore racing (including a Transpac) on...
There are very fine weave fiberglasses (Satin weave, if I've got my term right) that are quite difficult to wet out and have low peel strength......
I-Beam on its side.... that sounds like one of those bloody awful tillers that the F27s came with. Attached are a couple pics of what we...