Got this from the Strike 20 builder, to my FB-group a few days ago. Nice boat where the 5.8 hulls are now replaced by 6.0....
The grp honeycomb floor in place. A small wall from the same composite will be added in the front to keep water away, but open in the rear end....
Both rudder adapters in place, as the bolts arrived today. [ATTACH] [ATTACH]
This is how it looks with four of holes drilled. Just a mockup until longer bolts arrive. [ATTACH]
Have cut the pieces from 14 and 20mm HDPE. Still some milling and drilling is needed to make the parts look decent. Need a set of new 1/4" bolts,...
Thanks Solgato, we seem to think in the same direction using a bracket. I actually have a large piece of 20mm HDPE that can be cut in two 10.5 cm...
Nothing wrong with polyester/GRP, 50kg could be good enough depending of length. My hulls are 160kg together, total weight of boat ca 260kg....
Which float do you refer to? My 5.5 is about 50kg. GRP, carbon, epoxy, foam, honeycomb depending on model.
I am out of ideas on how to fit the Marstrom Tornado rudders to the lowish ama transoms. The transoms are also to forward slanted. I have got the...
Finally the build is up and running after not being able to spend much time with it last summer. I am now adding the floor in the cockpit and...
Suppose you have read this thread? lifting bi-directional foils https://www.boatdesign.net/threads/lifting-bi-directional-foils.53523/#post-740827
Good choice Patrick! I guess she needed some more volume in the amas. Nose down looks nice even at the mooring. I still have to wait to see if I...
After more than a year of house rebuilding, it is finally time to finish the tri after moving back home to Kristinehamn by lake Vänern, western...
Great footage by friend and forum member Christoffer Kedborn aka Sailing Chris.
16' Apollo Vaka / 18' Prindle Ama Trimaran https://www.boatdesign.net/threads/16-apollo-vaka-18-prindle-ama-trimaran.54313/ Apollo16 is a 1.8m...
How long is the waterline of your tritoon?
Take a look at this one: https://lup.lub.lu.se/luur/download?func=downloadFile&recordOId=8938139&fileOId=8938140
Thank you oldmulti, that covered it all. About Trifle I got curious as the pictures showed an ovalized and conical main and wondered how it could...
Is there any info about beam dimensions, waterstays etc. ?
Sabotage of a healthy classic dinghy! Buy a used GRP boat to fulfill your ideas, both easier and probably cheaper.
