Thanks for the input—all set now!
Post removed
Would like to use one with a 6” setback (minimum I’ve found is 4”). Given the length of the bracket (see attached photos) the additional...
I don’t know if the additional torque/lever arm exceeds the structural tolerances of the bracket or if the greater effective length of the bracket...
Thanks for all the suggestions. Just to give an update if anyone is searching the threads with a similar issue, I installed lifting strakes on...
I’m converting a 48 Fountain Express Cruiser to outboards, and would like to improve upon an existing outboard bracket design (to allow...
Per some excellent suggestions from a recent post, I'd like to use rigid shapeable foam "blocks" to create some prototype/mockup hull shapes for...
Thanks for the great feedback. The dry weight of the boat without rigging is 3500 lbs. If I eliminate the chamfer and convert the aft portions...
messabout: Would that imply that installing a trim tab in the aft rocker area of the pontoon would help? If so, would that be your suggested...
Specs for motor Do you have the dimensions for the motor/battery units available?
I would deeply appreciate any advice from the experts here... I possess a large tri-toon pontoon boat for which the intended use is ferrying a...