JB , Our new Canoe by Swift has through bolts on top of the aluminum gunwale attaching all cross members ,stainless bolts and locking nuts ,no...
JB , We also inherited a 1960's made in Quebec Canoe needing a paint job and a bit of this and that. Ours was structurally OK, Fiberglass was...
SailboatData.com - DRAGONFLY 800 Sailboat https://sailboatdata.com/sailboat/dragonfly-800 Why not contact Jens Quorning Dragonfly's CEO in...
Good price and taxes can be taken off that price if you leave Finland within a certain time ,can not build for that ,true in foam .... can build...
We would build D32 with Eclipse Hull that has similar shape up to the Eclipse Knuckle , re-purpose the Hull Kurt called it. The side of Eclipse...
Kurt sells D32 e-mail study plans ,they are very good , SP give a good idea ,best study plan I have ever got.... The sliding Amas with Mast...
I see I have some messages ,but , I do not see how to get a message ....any help?
No, we haven't sold them yet, EDIT....Decided to not sell D32 plans ....
Painters sanded away gel coat and more, did not replace it with anything other than top coat paint? Like to paint ourselves; works out OK other...
I remember this build , a Carpenter was the builder ,he posted about the build on the old ,now gone Multihull.com forum(Scott Brown brokerage UK)...
Agree ,Band Saw with thick re-saw blade if the pieces will fit and you set up for re-sawing.Try re-sawing a similar test piece of soft wood
1 US Gallon Epoxy weighs about 9 pounds (to assist in calc's above)
https://www.flickr.com/photos/mike_waller_coral_cove_31_catamaran/
Jim Caldwell posted : http://www.carbonfiberglass.com/Resi...Infusion-Epoxy
Fallguy ,if you buy proper infusion epoxy ,it is not a factor (heating up/exothermic) ,it's only if using regular epoxy with low viscosity for the...
Fallguy, You can easily make a wood table also ,no need for steel indoors ,you are a wood guy so......Steel is great but isn't wood easier...
To test the Vac pump, change oil or check pump oil & type of oil ,do a test panel.Plug it in read instructions about turning lever to engage ,dis...
Thankyou Jorgepease. I have a used pump ,will check out it's specs .... 50-50 helps....learning here as we go.....
Kurt Hughes D32 Trimaran plans for sale, $ 1,200 Canadian ($2,400US regular) plus postage....
Groper mentions he used 40 pounds fibreglass to 20 pounds resin ,is this the normal ratio we can use to calculate how much resin is needed to...