Hello everyone, just a quick question. Can mineral spirits be used to thin out Interlux Brightside paints? I'm getting ready to apply paint to the...
Good Day Folks, Another day and some more progress. Today I managed to get a few more bits done, the storage cubby in the middle is epoxied and...
Good Day, I was away from the site for quite awhile and as it turns out you beat me to the water. What a beautiful boat. You really did a great...
Here we go...Pics. I decided to fully glass the interior as well. [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]...
Hey everybody, Been really busy at work but over the past several weeks I've been able to work on the project. I managed to get the boat flipped...
Thanks for the speedy reply, I guess I'll be sanding tomorrow to remove the peanut butter. It seemed to go on pretty well but I do remember having...
Well, screw ups fixed the hull completely sanded, so the next step is to fair the hull. So this is done with the use of .....you guessed it, the...
I'm not too sure about that. Your project seems to be moving along pretty well too. I have yet to install any of the interior of the boat. If all...
Well it's been a while so I'll update you folks on my progress, I got the exterior of the hull completely covered in fiberglass and epoxy. My...
Hey there fellow builders, for anyone who's interested the link below shows the stages of my build as of March 14th. I'll be posting more to the...
Well folks it's coming together. I laid out the fiberglass cloth and got the the exterior of the hull completely glassed. It was surprisingly...
Thanks a bunch. I received my epoxy today so it would appear that Saturday is the day I glass the bottom of the boat. I too will struggle with...
Thanks for the encouragement! I checked out your build, really cool. I'm at the point of fiber glassing the bottom of my hull but had to order...
Thanks for the info and encouragement PAR. I'm trying to get my muscle lined up for the flipping of the boat so I can work on the bottom....
Well I got the seams on the inside sanded and ready to fair when I'm ready to finish the inside of the boat. I did get some temporary braces...
Hello PAR, thanks for the info. I'll have to decide if I'm going to install some temporary bracing flip the hull and then see about finishing the...
Thanks for the info and advice. It would appear i did things a bit backwards. I already have the inside filleted and taped. So i guess I'll have...
Well it's been a while but my build continues to come along. I have completed the stitching and gluing of the hull on the inside. I used epoxy...
Hello again all, I have a question in regard to splicing the plywood for the sides and bottom of my build. Given the sides are quarter inch and...
Thanks to everyone for their ideas and input. Snowing here today, so much so it has brought down several large limbs of our poplar out in the...