Gentlemen, Hello again. There has been a posting on my pre-war lapstrake I-14, WHIRLY. It can be found at: http://cbifda.blogspot.com/ Any...
Not a remarkable example. Wondered about the design "creds" of McAlary, who apparently has minimal work recorded. What about at least a jib with a...
Hello again, PAR. The dogs will be the solution for me. Thanks. Also on my table, is a rescued burn boat in the form of a McAlary "Arrowhead"...
Okay. How about 1/8" bronze "hunk o metal", in recessed underside of false floor rib. Screwed in from underneath would allow dog to swivel. Heat...
Thanks. Yes, I saw the insidious holes in the ribs too. If I hook into the small triangular spaces between the planks and the timbers, I could...
Thanks. You mean I should scrap the small block Chevy idea? - MGM
I agree about the sole structure and clues left behind. This boat was stored in an airplane hanger for many years, hence it's amazing original...
In other words, I've got it backwards. The faded spots, taped over, were exposed to sunlight, and the wider, still varnished areas were protected...
I like the less invasive "dogged down" idea. Thanks Now on to some equipment questions. Being an overpowered design, this boat had no cleats...
Was just trying to keep it original. And I agree, being a developmental class, there were no rules about the sole configuration. None of the...
Thanks for all the input. The main problem is that there are only 5 screw holes in the existing ribs. In the photos, I put Q-TIPs in the screw...
Apparently, Canadian built I-14's before the war were often clinker built. My mission was to reverse engineer the floor boards. All I have are the...
Recently acquired, approximately 1937 I-14, in very good condition. I don't want to change anything and would like to be accurate on replacement...
Arrowhead rescue "Arrowhead"... was drawn by Charles H. McAlary of Newport Beach, CA. Arrowhead is a 3/4 sloop rigged, 21' x 5'11" centerboarder...
Why the wax, sounds counter productive?
What about used to sail an Arrowhead 21????
Hello, The average thickness of the pieces of gelcoat that came off is between 1/32" and 3/64", wihout paint. The blue paint had adhered very...
photos of hull On photo of separate piece of gelcoat, the paint is the lighter blue.
Hello. I have the prototype Knickerbocker One Design, 1960. It was one of 20 sloops built for the KNICKERBOCKER Yacht club. My understanding is...
Any ideas as to why some of the gelcoat did not adhere to the fiberglass hull on my Knickerbocker?
