Approximately yes, from my memory, without going through the strength specifics comparisons again. I would contact the manufacturer and talk to...
Sent you an email thru here.....
It's just alittle brittle and you have to go up in density 30% to get the same compressive so. But for not an extreme application, like a crushing...
I have 20 sheets 12lb density 1 1/4" corecell 3'x6' sheets for sale for $100/piece plus shipping location south florida.
long as the deck is on the boat and you have supported the hull as to not change bottom configuration, Gonzo's good exception pointed out should...
i still would not add much outer laminate, in fact, none.......the lifting strakes focus the deflection on themselves. you will be surprised how...
guidelines can be a 'fits all' explaination. small boats need stiff panels only with enough laminate on the outer surface to not 'dent'......and...
I have 70 sheets of 3'x6'x 1 3/16" 12lb density core cell sheets left over for sale CHEAP. its commonly used for transom and engine stringer...
be sure to keep the balsa in low humidity environment. balsa will wick moisture out of the air and prevent it from bonding........also it will...
air cell foam is ok for low speed hull applications, or in higher speed hulls where you can afford, weight wise, to use a higher...